VTS reader application - Computers & Internet

Based on your description, it's possible that there is an issue with the VTS switch or a relay. Here are some troubleshooting steps you can try:

1. Check the VTS switch: Use a multimeter to test the switch and make sure it's functioning properly. You can also try cleaning the switch contacts with electrical contact cleaner.
2. Check the relays: There may be one or more relays in the VTS circuit that could be causing the issue. Use a multimeter to test each relay and make sure it's working correctly.
3. Check the wiring: Inspect the wiring for any signs of damage or corrosion. Make sure all the connections are clean and tight.
4. Check the fuse: There may be a fuse that protects the VTS circuit. Check the fuse and replace it if necessary.

If none of these steps resolve the issue, it may be necessary to take the watercraft to a professional mechanic for further diagnosis and repair.

Here's some excellent info
http://sccaproracing.com/files/VTS/06-vts-aston-martin-db9-0307.pdf

2.A.9.

Cylinder Firing Order: 1-7-5-11-3-

9-6-12-2-8-
4-10

Check that the hose for the MAP sensor is not disconnected or blocked. Then check that the vacuum port for the hose is clear on the engine side. After that, start looking at a shorted wire.

Hi Vinnie:
Check out this link.
http://sccaproracing.com/files/VTS/06-vts-aston-martin-db9-0307.pdf

If you use a mac, which I assume you do since its posted in this catagory... then you must purchase VMWareFusion, and install it along with a Windows Operating System; for example, I have Windows XP on my mac. You have to open VMWare Fusion, and install your Windows, then open windows, then download the Smart Card reader software and install it.
I had to do this because I'm military and have to use my smartcard to digitally sign forms.

Hi there,

Well first of all you can please explain your prblem in details....... like what problem do you have in this vts reader software.....?

Thanks

http://www.good-tutorials.com/tutorials/photoshop
http://www.pegaweb.com/tutorials/beginners-guide-adobe-photoshop/
try out this.
please rate my solution.
have a nice day.

Use the Sansa Media Converter that came on the install CD. If it does not recognize the vts, get a vts to avi converter, and then convert the avi to wmv.

Hey there jamesi23, begin with Nero start smart, open it and then choose application Nero Express.The Nero express screen which appears, has video/pictures on the left to choose. Click on it. Then choose DVD Video files on the right. The next screen gives you the Add feature to choose and select from the files on your computer which video VTS files it will burn. They will have to be in VTS or ISO image to be recognised. Choose your file, and open it. This will put it on the burn list for Nero express. Install the DVD blank media in the drive, and press burn when prompted. These are admittedly basic instructions, so if they are not clear enough, or you need further assisstance, please let me know. Good Luck!