Over a period of time my BOSCH drill needed recharges more and more frequently. It eventually reached a stage where there was very little power even after a full recharge. It has now reached a point where there is no power at all after a full recharge,
The drill is only 3+ years old and I have not used it a great deal.
Thank you for your help.
Jamie Rushworth
Usually the problem is in your battery, they develop a memory, they will only charge to a certain point. This can happen when the battery is recharged when it is not completely dead.
The key is to let the battery go completely dead, before recharging. I will wait till the battery is dead, then tape the trigger down and let the drill run till it won't move any more.
Sometimes you can reverse the battery memory, by doing the above, but when the battery is that bad, you might need to start with a new battery, and make sure it is completely drained, before charging it.
Wish you the best of luck.
Sincerely,
Paul Gibson
762 views
Usually answered in minutes!
×