The dishwasher Hotpoint FDW60 starts cycle, but part way through delicate light starts flashing and program stops. Dishes aren't washed properly and hasn't dried.
Can you please help?
Cheers
Hi,
I have just had my dishwasher fixed by Hotpoint, as the heater was working and the dishwasher only stopped with the fast and delicate lights just before the drying process he replaced the main control board. This has solved the problem, I suspected the fault to be the thermistor as the heater seemed to be getting to hot but I had no idea where it was.
It turns out the thermistor is attached to the main control board and hangs down behind the front door that gives just a rough temperature level for the main control board.
As it's soldered directly onto the control board I would suggest replacing the whole control pcb for anyone with this fault unless you can find any spec details for the thermistor.
1,258 views
Usually answered in minutes!
dishwasher starts program then fast and delicate lights up a couple of mins into program then freezes cannot reset and doesn,t finish program have taken the waste pipe off to make sure no blockages and that was fine
Water seems cold and dishes not clean
i have a hotpoint dishwater. it is stuck on the plate warmer setting. how do i turn it off and restart it on a normal cycle?
×