HP Laserjet 3030 printer/scanner/fax Language has

Have you loaded the drivers and set up your fax ie name number etc tone pulse. fi you have done this. then you will need to delete driver and reload.

You open the side door.then remove the scanner head cable & power cable after you refix the same things. then u power on the printer is working well.

right click on the task bar goto toolbars in that select language bar .then after getting that toolbar in ur taskbar by clicking on that u can select the required language from the displayed list

i have hp laserjet 3030. i cannot send or receive fax messages. i have checked with other machines as well. a beep sound is heard and there is no answer. my fax and phone lines are working fine.please help me as early as posible.

i have a hp 3030 all in one is there.. printer, xerox, fax is working properly but scan is not working .. kindly solv this problems..

i wan to change language in my printer hp laserjet 3030.

i can not under stand china language i want to change in english

please give me instuction

Hi want to find out how to scan from my hp laserjet 3030 all in one printer, fax, copier and scanner please.

press Enter bottom

press left arrow key twice

press enter key

select the language you need then press inter

my hp 3030 printers shows warning up bulb and make noise how can i solve it ?

Try this: 1. unplug all cables from back of unit (turn power off as well) 2. while the printer is off hold down the * and 5 3. while holding them turn printer on 4. continue to hold buttons until display reads 'Permanent Storage Init' 5. then release buttons 6. at the end of reset it will ask you to select language and location, just press enter then 1 to confirm Hope that works!! Ed PS. You could have picked an easier language!!!