I have a BlueAnt Supertooth BTSLBC3 car speaker that won't pair up to my new BlackBerry curve 8530 phone. The BlackBerry won't see the BlueAnt Supertooth BTSLBC3. The BlueAnt Supertooth BTSLBC3 is paired up (and works fine) with my old ATT prepayed Nokia flip phone. Why isn't the BlackBerry seeing the BlueAnt Supertooth BTSLBC3?

I GOT A SUPERTOOTH BUDDY CE0678 ITS PAIRING WITH MY PHONE BUT NOTHING HAPPENS NO MANUALS ETC PHONE SAMSUNG C303

Do you have the Supertooth 3, Supertooth Light, S1 or S2?

It would say on the back of the unit, look for supertooth.

Or go to www.myblueant.com and search for the product specifically.

Rylan

Hey,

All you need to do is put the device into pair mode. To do this hold the green button on the ST Light, while holding the green button release the microphone arm. You should get a blue/red flash letting you know the device is in pair mode. When you get this, go to your phones bluetooth menu and search for devices. Select the ST Light and if prompted enter the pin 0000.

Regards,

Make sure the device is in pair mode, to put it into pair mode hold the green button down until you hear a language loop (with the device off). When you hear the language of your choice let go of the green button and press it once right away. When you hear that go to your phones bluetooth menu and enter pin code 000 when prompted. If this does not work do a hardreset on your phone by removing the battery while it is powered on, when it is back up research and repair and it should work.

Rylan

I would pair the device with anohter model of phone and see if the issue carries across, by doing that you can isolate the specific source of the problem (phone or device). Do you happen to have a blackberry?

How to connect or pair a Blueant Bluetooth handfree.

1. Switch off the Blueant:
i.e. push the microphone inside the Blueant.

2a. Press and hold the GREEN telephone symbol (or Accept) pushbutton
On the Blueant flat face for 8 seconds. (this makes unit go into “pairing” mode)

2b. at the same time switch Power On to the Blueant by pushing out
the microphone on the side of the Blueant.

3.The Bluetooth Indicator will turn a blinking red/blue,
when you see this, release the Accept Button .
The Blueant is now in “pairing” mode.

4. Get you mobile in Bluetooth search mode to pair with a new device.

5. The Blueant will request your mobile device for a password.

6. Enter the password= 0000 , the devices now will be paired.

7. Set the Blueant as a trusted/authorized device, if this is option in your phone.
For more detailed information download the Blueant manual from the link below:
http://www.blueant.com.au/knowledge/manuals.php
I hope it helps.

Did you DROP the BTslbc3 from your old phone? If not, it may not pair with the new one. That is just a suggestion you may want to try. It may not pair with the new if it is still paried to the old. Hope this helps.

Make sure the BlueAnt Supertooth 3 is turned OFF.

1. Press+Hold the Volume Up button and then also press the green button to reset the unit.
2. After completing the above reset, turn the ST3 OFF again and wait at least 10 seconds.
3. Turn unit back ON and select language when prompted.
4. Follow the voice prompts and pair the ST3 with your blackberry as normal.
5. After pairing has completed you will hear the ST3 announce “loading phonebook – please wait”.

When your blackberry ask your permission to allow bluetooth to connect and donload phonebook allow it permanently.

Go to http://www.fixya.com/support/t1267258-pairing_problem_supertooth_btslbc3 All solved! :)

-----How to Create a new Connection----

Pairing with Phone
1. Turn off all devices (ST Light and Phone)
2. Turn on Phone
3. Goto Bluetooth menu on the phone (might be in connectivity)
4. Go to device list or paired devices (make sure bluetooth is turned on)
5. Delete any old profiles that are still in there.

6. Goto the Supertooth Light (BlueAnt)
7. Hold down the green button (send button)
8. while holding it down, open the microphone
9. the light should start to flash "red" and "blue" (you can release the green button)
10. go back to your phone, and go into either 'device list' menu or 'paired devices' menu on your phone.
11. click on either search, add or new devices. Function depends on different phones
12. when the phone has found the device, it should say 'ST Light BA V1'
13. select it, then enter passkey "0000"
14. If your phone ask for authorization or auto connect, just click "yes"