At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
There is no visible damage to the lamp.Need help in checking the ballast. Test points and voltage levels. I do not have the circuit diagram Thanks for the help.
Regards, Clarin Dear Marrie,
There is no visible damage to the lamp.Need help in checking the ballast. Test points and voltage levels. I do not have the circuit diagram Thanks for the help.
I am also experiencing this issue and would like to test in-houseto see if this can be repaired. I have two non-functioning and would like to combine working parts so at minimum I can get the remaining lamps in stock used up and get our full money's worth out of these portables.
If there is a circuit diagram available that would be great.
I am also experiencing this issue and would like to test in-houseto see if this can be repaired. I have two non-functioning and would like to combine working parts so at minimum I can get the remaining lamps in stock used up and get our full money's worth out of these portables.
If there is a circuit diagram available that would be great.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
with both lights solid. according to the manual all it says is (there is an electrical failure inside the unit, please take to an authorized servicer). if you are able to do this yourself you will need the schematics and a voltmeter to start testing your voltages. your lamp is fine so dont waste your money replacing that anymore. if you would like the service manual send me an email to [email protected].
It maybe a problem with your lamp as they can run for a short while then shut down. When it shuts down do you get the lamp or temp indicator coming on?
hi,
check the lamp cover is it open or not. there is switch for sensing, is the lamp cover is open or not. may be it became faulty. also check the lamp is it burned or not . if found burned replace it.
ok
hi, your projectors lamp cover may be open. or there is some thing happened (may be contact problem) with the lamp cover open sensing switch. just open the door and close it. and then try again. ok
Dear Marrie,
There is no visible damage to the lamp.Need help in checking the ballast. Test points and voltage levels.
I do not have the circuit diagram
Thanks for the help.
Regards,
Clarin
Iam have the same thing happening the blub is good but when i plug in the power cable the 2 lights start blinking and projector never turns on.
I am also experiencing this issue and would like to test in-houseto see if this can be repaired. I have two non-functioning and would like to combine working parts so at minimum I can get the remaining lamps in stock used up and get our full money's worth out of these portables.
If there is a circuit diagram available that would be great.
×