Stopped stirring, jammed sound

motor/gear failure

sounds like your pump has got jammed with a coin or usually hair grip.

the humming noise is its trying to drain-check the pump it may have something stuck in it-cheers Dennt

there is a bearing at the back of the drum that gets dry and sometimes the ball part wears down causing the noise you are hearing i would check that first

"Lock Error"

The fault code suggests that the lead that runs to the door interlock switch is faulty, has come off or is loose (Probably the latter by what you describe). I can't inagine how this intermittant error could be linked with what sounds like an item stuck in the drum.

For the item in the drum, I have sucessfully removed screws and the like by thoroughly draining the machine then turning it onto its face, supported by enough bricks or other items to allow me to have the door dangle open. Gently spin and rock the drum back and forth and let gravity do the work. It doesn't always work, but it often does.

Humming sound could be jammed pump.Remove th filter and check pump Blades are free, nothing is stuck in it....

pson r230 paper jams and long beep sound

WELL, WHEN YOU UNPLUUGED THE BLENDER, AND RESTARTED IT - DID IT WORK. iF IT DID THEN IT MEANS THAT IT HAPPENED MIGHT BECAUSE YOU HAVE NOT BEEN USINGTHE BLENDER OFTEN.

bUT IF ITIT MAKES THE SOUNG AFAIN THAT THE MOTO OR WHERE THE CORD IS- SOME WATER MUST HAVE GONE INSIDE. IT IS BEETER OF YOU TO CHANGE THE BLENDER BECAUSE IT IS ALWAYS WRITTEN IN THE HANDBOOK THAT IF IT MAKES ANY KIND OF AEEFUL SOUND OTHER THAN THE NORMAL SOUND- STOP USING IT IMMEDIATLY.

Check the pump to make sure there isn't something stuck in it.

quite possibly the drain pump which would cause it to stick in rinse cycle. the humming noise you heard is probably the drain pump powered up but jammed. likely cause is a foreign object stuck in the pump impellor - main culprit is bits of bra wire. take the pump to pieces and extract whatever is jamming it.