I have just moved into a house with Leisure rangemaster 110 dual fuel, how do i change the time on the clock have pressed all knobs in various sequences, found the automatic, the timer but cannot move it on 1 hour.

• Hello David,
  
  when the clock does not work, the (left hand) oven will not work too I suppose.
  Often when the clock does not work, it is only the timer that does not work. In that case, the timer can be bypassed. The oven still works then, but without the timer and the clock will also work as a clock.
  So no timer.
  
  When it is an older rangemaster, and the ignition does not work, then probably are some wires leaking. I that case the power for the spark does not come to the burner sparkplug.
  But when all plugs do not spark then there are 2 possibilities I think.
  
  1 the ignitor is gone
  2 the ignitor does not get power
  
  I hope this helps, I wish you a good weekend, Dik

Leisure Rangemaster 110 Electric Range Cooker How to bypass

Hi Stella,

i am sorry for you, but you can forget repairing the timer.
You can replace it of course.
You do not need the timer to operate the oven.
For that you need to bypass the timer. The clock will stay working normally.
Although the 55 is smaller then the 110, the working of the clock should be the same.
Net link will give you more information and I hope you will fin the solution there.
Kind regards and a good weekend, Dik

Leisure Rangemaster 110 Electric Range Cooker How to bypass

To set the time, turn and hold the Timer knob to the clock
symbol = and at the same time turn the Adjusting knob left
or right until the clock shows the time of day. Remember this
is a 24-hour clock. Let go of the Timer knob and it will spring
back to the vertical, oven manual setting.

What is the model number of the unit?

I know the answer. You ,must set the clock else the oven(s) wont work.

at the back of the timer/clock there are 4 wires live and neutral to power the timer/clock and 2 others they may be red or orange. safely connect these other 2 together and you are good to go. if you need a new clock email me [email protected]

TRy this page http://www.rangemaster.co.uk/index_Rangemaster_Manuals.htm

yes you can take the set of knobs and handles to a chrome shop near you, you can find them in the yellow pages. or by calling the better business bural in your city.

it is not at all obvious.
from memory, there are 2 screws on the lhs side of the plate which remove and the plate will then move sideways but may be difficult to shift

Hold down two left hand buttons together for a long time. that should do it.