Splendide 2000S Vented Washer/Dryer Logo

Related Topics:

Posted on Mar 13, 2008

Washer fills, drains, & final spin

Washer fills, drains, fills, drains, & does the final spin. It does agitate during wash, rinse, or dry cycle???
HELP
Thanks

  • 4 more comments 
  • GlenSharon Aug 30, 2008

    Fills, washer drum turns a few times, then drains out. While it's draining the dial is clicking turning around and around and clicking. I have had to stop it reset it and try again......several times the same thing happens over and over!
    I finally set it on the rinse cycle and it seems to be doing better. I know it's not fixed, but am happy the cycle will end so the door will open so I can get the clothes out of it.

  • Anonymous Mar 15, 2014

    washer fills with water then nothing. I move the knob to spin cycle and it will spin and drain. The wash cycle does not work. Help

  • Anonymous Mar 16, 2014

    model 2130

  • Anonymous Mar 18, 2014

    Washer does not spin or drain prior to rinsing.

  • Anonymous Mar 21, 2014

    washer will agitate and it will work in spin and rinse cycle but will not fill with water

  • Anonymous Mar 22, 2014

    i have tried to put on other programmes and still i does not spin

×

2 Answers

A

Anonymous

I had the same problem and ended up replacing the control board which solved it.  Contact Westland Sales at 800-356-0766 ext. 5 for tech support.

A

Anonymous

Make sure the tub us actually moving. Sounds like the belt may have come off. That is what has happened to me.

Ad

1 Related Answer

Anonymous

  • 3587 Answers
  • Posted on Mar 13, 2008

SOURCE: Washer doesn't agitate

sounds like your washer went mellow on you(doesn't get agitated, right)?

ok. enough humor.

sounds like there's a problem with the motor/belt/control board in that order

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer
0helpful
1answer

Please describe a typical washing cycle to me on the RTW4440XQ Roper 3.1 Cu. Ft. Top-Load Washer, please.

The typical cycle is;
fills to selected water level
agitates wash cycle
drains wash water
spins wash cycle
fills to selected water level on rinse cycle
agitates on rinse cycle
drains rinse water
spins final time
end of cycle
0helpful
1answer

Whirlpool top load washer no low-speed agitation. The unit fills, starts the wash cycle with normal agitation, but after a few minutes it just sits there soaking until the it's time to drain/spin. Drains...

Either the wire going to motor for non working speed is loose or damaged, or motor is bad. It could also possibly be timer not sending power to motor for that speed.
0helpful
1answer
0helpful
1answer

Will not spin on any rinse cycle

Hi, This washer does not have a belt. While the washer is agitating, if you lift the lid will it stop? Some models will agitate but not spin if the lid is up. It sounds to me like the lid switch might be going bad.
If you will get me a model #, I can look this up for you and give you a better idea.

Vic
3helpful
1answer

Washing machine does not drain during rinse cycle?

Turn timer to rinse cycle. let fill up and agitate. when it stops agitating it should pause then start to pump water out. After about 2 minutes it should pause for 3-5 seconds then start again and spin. If it starts the first time and never stops it will just continue to pump but no spin. The 3-5 second pause allows the transmission to shift to spin. If it does not do this the problem is your timer. You may need to do this a few times to verify the problem.

If that is not the problem it is likely that you need a new clutch. You will need a technician to install a new clutch for you
0helpful
1answer
0helpful
2answers

Washer doesn't agitate

sounds like your washer went mellow on you(doesn't get agitated, right)?

ok. enough humor.

sounds like there's a problem with the motor/belt/control board in that order
0helpful
2answers

Won't Agitate

If you can hear the motor during the agitate cycle, the the transmission has stripped gears.
Not finding what you are looking for?

576 views

Ask a Question

Usually answered in minutes!

Top Splendide Washing Machines Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66957 Answers

David Kassin
David Kassin

Level 3 Expert

981 Answers

Are you a Splendide Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...