Question about Samsung LN-S4692D 46 in. LCD HDTV
I have a samsung LCD
lns4692d, and the picture no longer comes up on the screen, i can go
through multiple sources get sound but no picture. Usually when you
change sources there will be a source name on the screen which does not
show up anymore. The LCD is backlight, and you can see when you change
channels or sources it flashes, but never a picture. Based on other
comments I have taken the back panel of the lcd tv, everyone else who
had this issues states this to be a issue with tcon (timing controll
board) /lcd controller board. Is this the same board where the audio video sources, antennae and cable plug into?
BN94-00963B ASSY PCB MAIN-SPZ LNS4692WX/XAA,AM LCD
I have LNS4692D. Returned from vacation, turned tv on - no picture. Tried turning tv off for 4 hours- nothing. Symptoms are: tv is on - no picture , just sound; menu doesn't show, volume bar doesn't show;E.Saving is working - the backlight is changing from lighter to darker.
Found this website and ordered T-con, otherwise known as the LCD panel driver board, p/n# Bn8101286a ( thanks premtech) from partstore.com for $124. Part number BN81-01286A A/S T-CON Board.
1.Remove plastic cover. There is an arrow for each screw that needs to be removed. Make sure to unscrew pins next to VGA port. I've spent some time trying to figure out what else is holding the plastic panel until I found this pins.
2. Remove big metal shield in the middle of tv that is covering main components. This shield is being held by small black screws all around it.
At this point you will see cover of T-CON. Here is the picture
http://www.avsforum.com/avs-vb/attachment.php?attachmentid=118863&d=1220531321 (thanks ldac9). Do not attempt to remove that cover yet. Proceed with a next step
3.Remove metal panel that holds main components. Locate big chrome screws that have arrows pointing to them and unscrew them. Remove 2 more screws on the bottom of the panel that holds it together with a box for cables. At this point the main panel will be lose
4. Carefully start lifting the panel. You will see that there are connectors going from components on the panel to components on the lower panel and T-CON. Carefully unplug these components and raise the main panel.
5. Remove 4 screws that holds T-CON cover. Pull the cover so that T-CON is completely exposed. The cover is connected by thin alluminum , don't hesitate to pull it , but don't rip it out.
6. Once T-CON is exposed you will see 2 red ribbons. I've spent some time to figure out how unplug those from old T-CON board. Here is the suggestion. Don't try to pull it out. All you need to do is to lift small plastic lever that is part of a connector. Then ribbon can be slided out. If not sure what to do, see how this is done on the new T-CON. It has a principle of buckle on airplain safety belts.
7. Remove old T-CON and install new you.
8. Follow reverse order.
I've never fixed TV before , but this was totally successful project.
Posted on Nov 19, 2008
I have the same problem of audio with no video on my Samsung LNS4692DX/XAA. 2.5 years of lite use of this Sumsung in my Bedroom, My 60" Sony that is 4 years of a lot of use in my Family room has no problems just a great picture.
Surfed internet and found 100s of people reporting the same problem with that model and a lot of people saying the problem was caused by a defected T-CON, part number BN81-01286a and some also had to replace the Pico-Fuse.
Called Samsung at 800-726-7864 who claimed no one has noted this as a problem!---BULL!! Samsung the Toyota of TVs.
I will be filing legal action in New Jersey, in many courts---win or loss that not the point--Samsung legal fees will be the point and getting the word out!
Also suggest to all to file at consumeraffairs.com.
Frank at firstname.lastname@example.org
Posted on Mar 09, 2010
The TV is fixed. I just want to say thanks for bjgryskie for giving methe courage to purchase and install the board on my own. This was not asimple task. There are many screws first of all. The most importantpart is to be very gentle when removing the panel that rest above theT-con board. There is a ribbon that is connected to the board that issecured to the panel above it. Also, very important is to secure thetwo ribbons in the two slots on the board and snap in, but to not pushthe "orange" ribbons too far in, or you will have problems with yourpicture. I pushed the left most ribbon in too far and it caused theleft half of the picture to be 70% lighter than the right had sidewhich was normal. I had to remove the left ribbon, reseat it, then snapin. But I did not push it in as far as I did before and it worked!!!You will need one person to help with balancing and securing the boardunless you decide to completely remove the entire panel above theboard, (which I didnt).
All I needed was a picture of what the board looked like and where itbelongs and I was fine. You can find a pic of it at the AVS forumshere.http://www.avsforum.com/avs-vb/attachment.php?attachmentid=118863&d=1220531321
(I hope this is ok.) You may have to register to view the picshowever.I've seen a lot of people say its just easy, but that's notentirely true. You must be very careful when pulling any thing out.Hope this helps!! Good luck.
I still think this sucks that we are responsible for repairing a faulty part after only a year and a half. I will write a letter to the CEO of Samsung and let him know how disappointed I am with the current policy in place. Everyone should, they actually do read complaints! Good Luck again.
Posted on Sep 08, 2008
I bought my Samsung TV LN-S4692D in May 2006. On 2/15/2010 in the morning I lost the picture but had sound. I found the solution here!
Fun2's solution is the absolute best! I printed it out and followed it step by step to solve my exact same problem. I even followed the link to the picture that ldac9 posted.
A few hints of my own, for what it's worth:
1. Tcon board is at the top of the TV smack dab in the middle.
2. Take the TV off the stand and lay face down on top of a bed, using towels to cushion. You can probably leave the stand on and just hang it over the edge of the bed.
3. I could not find the board at www.encompassparts.com
I did find the board at samsungparts.com for $156.74
I also found it on ebay for $118, bought it from ebay seller e_techparts ( I am not affiliated with this seller). I ordered board late in the day 2/16/10 at 21:19. I'm a fast payer....I pay as soon as I win the buy it now. E_techparts had that board in my hands on 2/19/10 at 15:00 by priority mail. Very fast shipper! My TV was fixed in 5 days!
4. Can't stress enough to remove the 2 silver screws next to the VGA conector. These can be removed with a flat blade screwdriver, all other screws are phillips and you'll need a #1 and a #2 with a long shank to do the job.
5 The tcon shield or cover.....what a pain....
Like kburt616 I drilled a hole in the top of the plastic cabinet in order to get a phillips screwdriver in to remove the stupid 5th screw that holds this shield in place.
I suggest folding back the aluminum type tape from the shield first before removing the 4 screws that fun2 talks about in his step 5. Folding this thin silver tape back will expose the 5th screw and show you where you need to drill.
You may not have to drill....maybe you can bend the shield up and out of the way to get at the top 2 ribbon connections....your call. I like everything exposed and open.
Once the tcon shield is off. The top 2 connectors have thin black levers that run the entire width of the connector, these can be pryed back/up carefully with a small flat blade. Once popped up the ribbon cable slides out.
Replace board and reassemble...... Now, I didn't replace the screw that I had to drill the cabinet for. I simply used tin snips and cut the tab off the tcon board aluminum shield. You will see by the construction that the middle tab and screw were completely unnecessary.
Tape the top of the cabinet where you drilled and you should be done. By the way....that foil tape used on top of the tcon board shield is the same stuff that Air Conditioning people use to tape flexible duct hose and air duct joints with. If you have some you can make sure that shield is taped well at the top.....I suspect duct tape would work fine too.
I hope I have not confused anyone.....fun2's instructions are excellent and I just wanted to add my findings. That said, I almost got 4 years out of my original tcon board and I hope I don't have replace it again........these things should really last alot longer! I had an HP plasma go out way too soon with another known issue regarding boards.....but HP would NOT honor a 3 months expired warranty......I'll never buy another HP anything ever again....now unfortunately I'm leery of Samsung....but at least I was able to fix it.
Thanks to all that have posted their findings here!
Posted on Feb 20, 2010
I had the same problem as most on this posting; audio but no video. Called Samsung and since my 3 year old TV was out of warranty they referred me to a local repair shop. $95 for the repair shop to come out and look at the TV. Anyway, after reading the posts I bet that the T-Con board was my problem. I ordered it through Encompass and it was here within 2 days via UPS ground. I was amazed that it came in that quick. I printed out the post from "Fun2" and followed his directions. I'm glad I had his instructions otherwise it would have been a lot harder. The hardest part of the job was the removal of the ribbon cables from the T Con board. That took me about 30 minutes to figure out. In the process I ended up trashing the connector on the old board. I installed the new card and now it works like a champ again. This project took me about 2 hours to complete. I would again like to thank "Fun2" for his instructions. For my new room addition I was going to buy a new Samsung 55" LED TV but now I'm having second thoughts. I hate to spend all that money on a TV only to have an expensive repair hit me 3-4 years down the road.
Posted on Feb 11, 2010
Premtech... were is this "small pico fuse"
ive replaced the t-con and main boards<--NO luck,,
I have sound but no picture, back light is working.
I think i was sent a bad t-con from Discount-merchant.com
Anyone have any ideas on what i should try next?
I may get a 2nd t-con boad and try that
Posted on Apr 23, 2009
I had the same problem with my 1y 1/2, and buyed the tcon board on samsungparts. BN81-01286A. Everything is good now.
Posted on Jul 07, 2008
Unfortunately I can't see the pictures you attached but you're dead on with replacing the T-con, otherwise known as the LCD panel driver board, p/n# Bn8101286a and available from several distributors, I use Vance Baldwin... Also check a small pico fuse located at cp1 on the board. This pico sometimes opens when the t-con fails.
Posted on Mar 13, 2008
Wow, you guys rock. Cost me 125 dollars to fix the problem and sears wanted 105 just to come look at it and 650 to fix it. I ordered the board and put it in, in about 30 mins. All the info is in this thread. If you have the same symptoms as everyone else, get the board. Put it in. You will be happy you did.
Posted on Feb 26, 2009
I had the same problem with my Samsung ln-s4692d after 14 months of owning it. I contacted Samsung and they put me in touch with a local repair shop that diagnosed the issue as a faulty main board (for a $90 diagnosis fee). I replaced the main board and there was no change. After finding this site, I replaced the LCD controller board (or TCON board) - and it fixed the problem!
The replacement was not too difficult, although a little intimidating to take on. I just took my time and was as careful as possible.
Just wanted to say thank you to the people on this site for the information and advice.
Posted on May 23, 2008
Your t-con board is bad
Posted on Sep 03, 2015
Turnpower onwait5minutes thenturn off,count yellow or whatever your standby color is,count the flashesafter you hit turn off switch.this is r trouble codes/09 tv or newer.under 10 flashes,its your power inverter,ten is yourmainboard,11flashes is your t-con and 13 is ccfl board14 is bad driver board1or2 and so on.these r basic trouble codes 32inchdynex lg,samsung.15 flashes on any lcd tv means bad panel itself.backlight has no code,if its lite its good,yours truly email@example.com
Posted on Oct 13, 2012
My Samsung model LNS4692DX/XAA has the same prblem, Has sound but no picture, the lights are on inside of the TV. I replaced the T-Con today and it still has the exact same problem with the new T-Con installed.
What else could it be?? I'm guessing my T-Con wasnt even bad? I'm stumped now .... Please advise!!
Posted on May 31, 2012
Want to add my thanks to you guys for this solution and giving me the confidence that it could be done myself. Just replaced mine - took about 45 minutes of proceeding slowly - and this guy who has never before fixed a TV set now has a working TV. Bought the part at encompass, had it in 2 days.
Posted on Dec 06, 2011
Wow, that's all I can say about this site! Same problem as everyone else. My Samsung LNS4692WX/XAA lost the picture last week, audio still good. No volume bar or menu. After reading this thread I contacted several local repair shops. They quoted me $150 for the board and anywhere from $200 to $300 in labor to replace. I ordered the "Control Board" (BN81-01286A) from "Encompass Parts" formally Vance Baldwin at http://www.encompassparts.com/ for $109.00. The part arrived and I replaced it as per the above instructions. Yes there were many screws and it was a bit intimidating but after about 90 min, I was watching my Samsung once again. Thank you all for this information, You guys all rock!
Posted on Dec 30, 2009
I fixed it today!!! Received my part at 130 had it up and running around 3 O clock. VanceBaldwin.com 116 bucks. UPS Blue ended up being 33 Dollars but it did arrive in two business days (I really needed my TV so for me it was way worth it).Ive been playing Xbox 360 and Watching TV all Day Im So HAPPY with the end result.. If you plan on attempting this the hardest part is unclipping the ribbons.. Just take your time and make sure the white line matches up when you put the ribbon in or else your picture wont be perfect..
Posted on Feb 12, 2009
Does anybody have a circut diagram of the LN-S4692d? It would really help me.
Posted on Aug 29, 2008
We've been having a similar problem with our Samsung 26in LCD, it is also about 1 1/2 years old but fortunately our warranty is for 3 years. Sometimes when turning on all we get is a quick flash of the channel and then blackness but the sound is there.
**We found that turning the TV off then turning on again in analogue mode then changing back to digital mode solves the problem.(using the TV/DTV button).
But we wanted the TV working properly so we've just had the main board replaced and that hasn't worked. So the LCD board is next.
Posted on Aug 28, 2008
Same problem here. Exactly 1.5 years and I turned the set on....it came up fine and then the picture went out but the sound was still on. This is obviously a major problem with this set. From what I read here, looks like I'm pretty screwed on obtaining this part anytime soon. Hey, GO CHINA!!!
Posted on Jul 03, 2008
Well, the TCON board is purchasable from Samsungparts.com
(BN81-01286A $160). I removed the back panel from the TV and the board
has 2 removable connectors as others have stated. Now I need to decide
whether to dump more money into this TV in hopes that it will fix it or
cut my losses.
I was told by a local TV repairman that TV's sold by the big box stores are made with inferior Chinese components as compared to ones for the specialty stores and that most will fail. Can any experts confirm this?
If I decide to go forward I will post the results. If anyone has tried this already please share.
Posted on Mar 25, 2008
I have the same problem but I have'nt been so fortunate. I've been waiting 2 monts for this t-con board. I have a warranty from Comp USA they're suposed to be handling it but 2 months later they still can't get the part and they just told me today that the back order date has been moved to May 22nd, it was April 22nd then May 7th now May 22nd. I found you guys on an internet search good info. I went to samsungparts.com they say there is a nationwide back order till june 22nd. I'm dying here can anybody help.
Posted on May 08, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 02, 2017 | Samsung Televison & Video
Aug 06, 2016 | Samsung 40 Inch UA40F6400 Full HD 3D Smart...
Feb 03, 2016 | RCA Televison & Video
Oct 26, 2015 | Samsung PN43E450A1FXZA PN43E450 43 720p...
Mar 31, 2015 | Samsung LN40A550 LCD TV
Mar 07, 2009 | Samsung LN32A330 32 in. LCD TV
Oct 05, 2008 | Televison & Video
Mar 25, 2008 | Samsung LN-S4692D 46 in. LCD HDTV
Jun 06, 2014 | Samsung LN-S4692D 46 in. LCD HDTV
36,348 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: