Cannot see my network printers after installing ASA 5505

HI,

· Please check the whether the security level for DMZ and outside interface, If DMZ is high security level. Please do the NAT configuration
· If it's having the same security level. Please issue the command "same-security-traffic permit inter-interface "in the global config mode.

Please check the upgrading the software in the below link
LINK

This should tell you everything you need to know - http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080940e04.shtml
Hope I helped Dr Reed

Yes, it is possible and Yes you have to purchase it from Cisco.
Sorry, that is how they make the big bucks.
Consider a service contract on the unit, then you can download the firmware much cheaper.

1. Change your PCs default gateway to your firewalls' internal IP

2. configure the nameservers on your ASA

Then internet will work fine.

Hi, the Cisco ASA 5505 is the base model, and URL filtering is not available on this model. The first model that allows URL filtering is the 5510, and every model above that. You can view the models and features here:

http://www.cisco.com/en/US/products/ps6120/prod_models_comparison.html

A conflict in the IP address, resolve it

put the one cable to wan which come from internet and you have to connect the pc or any other connection then you connect in the lan

http://www.cisco.com/en/US/support/tsd_cisco_worldwide_contacts.html

From the US, you can call: 1.800.553.2447

From there, Cisco will be able to tell you what your warranty status is by the device's serial number, and can also provide you with a quote if your warranty has expired.

take this site address u will get all the commands of firewall

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/asa80cfg.pdf