No sound from zenith dvt412 stuck in bypass mode..how to override?

All you have to do is connect an Optical or Coaxial cable from your Direct TV receiver to the same type of connection on your Zenith. Switch the unit to that input and you should be good to go. For more information, please visit my website at audioserviceclinic.com. Thank you.

See if you can select audio channels from the audio control menu, and try different choices in there.

I just discovered this site because my remote just quit as well. Here is the direct link. http://www.partstore.com/Part/LG+Electronics+Incorporated/LG+Electronics%2fZenith/6710CDAL01C/New.aspx?ModelMfgName=LG+Electronics+Incorporated&ModelBrandName=LG+Electronics%2fZenith&ModelNumber=DVT412 Not bad price either.

To everyone having sound trouble... there is a solution! First make sure your TV is OFF. Unplugg the 2 main cables going into the DVT 412 for 30 seconds. Then re-plugg them. Press down for a few seconds on all the BLACK tabs connecting the sound wires and release. Without a disc in the player... and the TV still OFF, turn the power on and immediatley hold the down the STOP button on the DVT412 for 5-10 seconds. Your picture, vocal and backround sound will return to normal. Feel free to make changes to the sound now! Happy tuning... GO STEELERS! LOL!

Try this without disc on the tray press the button stop for 5 seconds.Good luck

how do I get the dvt41`2 to play audio from my tv

wot inputs does ur tv and sound system have?

thanks it help me very much 

find the info/display key on the remote and press it,go down to the box that show head speckers it should show 2 ENG and CH2.
if not change it by pressing the down key then press ok key

I had this problem, it's a real pain. You need to turn the system on and goto Setup Mode, then count the number of tiems you would need to scroll down and reset it. You will see no picture, so you ahve to actually cound the number of clicks down and over, you are doing it blind, but it will work.