Plastic gears broken on dremel 395 - Dremel 395 Variable Speed Multipro Rotary Tool Kit

You will have to remove the plastic cap on the end of the tool where the tips go in. Then screw on the cutting guide.

hello,

try to find it here:

http://www.powertoolspares.com/parts2.php?model_ID=3057

may this help.

melnavz

YES.
DREMEL HAS THAT PART AT ABOUT $2.00 AND SHIPPING ABOUT $2.50.
CALL 1-800-437-3635.

I found a coupling part at ereplacementparts.com and the part number is 2615294309, but I would recommend calling Dremel direct at 1-800-437-3635 to ensure this is the right one. They made a change on this coupling. Let me know if you need more assistance.

Look at eReplacementParts.com and the parts diagrams,

If you need more help come back.Post / thumbs / testimonial are welcome!

Remove the collet nut and collet then unscrew the sealing cap (black plastic ring), this has the same thread as the inner of the multi kit tool, so just screw on the tool then replace the collet and nut

Here's the email from I got from Dremel (in my case the flex coupling broke):
Inside the tool is a flex coupling and spline driver.

The flex coupling is # 2615294309 and the price is $ 1.25.
This is the hollow plastic sleeve about 1" long with grooves on the
inside, that goes between the motor shaft and the output shaft.

The spline driver is # 2615294308 at $ 1.00.
Spline driver sits on the direct end of the motor shaft. The flex
coupling sits over the spline driver. Spline driver is about 1/4",
hard plastic with grooves on the outside.


Total shipping for orders under $ 5.00 is $ 2.50. Orders over $
5.00 is $ 4.00.


I have provided ordering instructions below.

To order by phone: 1-800-437-3635, Monday-Friday from 7 am to 6 pm
central time. VISA, MasterCard or Discover is accepted.

To order by mail:
Dremel
4915 21st Street
Racine WI 53406

You can call Dremel direct at 1-800-437-3635 and order the part. Let me know if you need more information.

clean the slots that hold the brushes, sometimes they get cloged and the springs do not push the brushes all the way to the armeture.

REFERENCE M/N: 395 - Type 3 - Dremel does not have the parts listing on their site for some reason. I actually have the original I saved from 1988!
The part number for the Nylon Coupler is:
Illustration Code Number: 5
Description: Flex Coupling
Part Number: 529430970

This is all from Drawing (Form) Number:5296074 10-88