Kodak easy share v1003 with broken lcd how i can fix this cheap

my v1003 camera is saying reset switch on memory card. I can not take any pictures at this point and I don't see instructions in my Easy Share manual. I'm on my way out of town it is 6:28am and my camera won't work. can someone please help me. thank you
E.J
[email protected]

I?ll be fine. All your original pictures are on the C drive. Unless you have changed the directory onto which you save when transferring: You can find the pictures under C-Drive, my pictures. The camera might need to be recharged. The camera doesn't charge from the computer while transferring pics. You will need to switch the camera off before the camera will start charging.

If this fault message is on your computer starting Easy Share Software: Please do a Clean Install on the software:
Please follow the instructions:

1. Uninstall Easy Share software:
1. Select Start > Settings > Control Panel > Add / Remove Programs.
   For Windows XP operating systems, select Start > Control Panel > Add / Remove Programs.
2. Select Kodak Easy Share software.
3. Select Remove (or select Change, and then select Remove).
2. Run the Clear utility:
1. Visit the CLEAR Utility for Kodak Easy Share software Web page at www.kodak.com/go/clear
2. Click the Download button, and then follow the on-screen prompts.
3. After restarting your computer, visit the Kodak Easy Share software Web page at www.kodak.com/go/easysharesw and install the latest version of Easy Share software.

Your fix could be as simple as cleaning the camera's battery contacts, or it could be something more serious and expensive. Before you pay for expensive repairs that you may or may not need, check the Kodak Help Center by clicking on the link below. It uses a simple Q&A format to diagnose problems and propose solutions.

http://www.kodak.com/global/en/service/repair/troubleshooting/troubleshooting.jhtml?pq-path=6198

no the screen is not worth gettin fixed the lcd scrren usaually cost more than the camera itself does but if your camera is discont get it fixed because their will be no other camera like it

Go to Kodak.com and download an install disk for your camera model. It is free.

I have a 2 GB SD card that i use on mine, and i dont seem to have any problems with the camera being slow. I hope this helps and good luck!

hi

try a fresh download of the drivers from here
KODAK EASYSHARE V1003 Zoom Digital Camera Downloads and Upgrades

riz.

Hi,
unfortunately it would appear to be a CCD or main board failure.
If the camera is out of warranty (as this should be covered) my best suggestion is to pick up one off ebay with a broken screen and put your screen in it, broken screens are common on these cameras so they go quite cheaply, far cheaper than kodak would charge for repair and the swap is easy.
There are several searchs to try "parts v1003" "spares v1003" "Faulty v1003" "repair v1003"

Best of luck

goto http://www.digitalcamrepair.com/self_diagnosis_page.htm
for self diagnosis.please let me help you before leaving a bad feed back.