I have model RE36BNL1 and it keeps coming up for error F-5

Count the flashes, that's and error code telling you whats wrong with the TV. Then go on line type in make and model no. and number of flashes. for example ( Sony trinatron model 46xxxxx 5 flash error code ) This will tell what is wrong with the TV and what to replace.

Depends which model go to the following page it list the errors and the problem

http://www.appliancepartsquick.com/MaytagRangeFaultCodes.html

Self protection circuit will cause this---see if blinks are in a sequence---5 blinks, pause and 5 blinks etc---that will be a error code and you Can Google the model number to learn what the error is and what in general causes it.

this is a fault code 43 which mean the out of balance switch is either faulty or the switch isstuck in the on positionfree up or replace switch which is located just under the main board

Can you give me the solution by error 2and 5
Bosch TCA 67
What is the problem by these errors

#5 error keeps coming up when bp taken with new batteries

Thats the error for lamp driver error. Which means the Ballast is most likely defective. You can get the replacement ballast for your model at the following link which comes with installation instructions.
http://servicemanuals.vstore.ca/product_info.php/pName/kdfe42a10-ballast-assembly/cName/sony-parts

i am getting error E000001 -0010

Kungfuj3sus:

Thank you for your review.

We would like to inquire further about your review with you. Please respond back to this email address, [email protected], with your name, phone number, street address, zip code, model & serial number, and date of purchase on the appliance.


We look forward to your reply.
Thank you,
Whirlpool® Social Media Relations

same CRT problem have a look at a more detailed post on this forum