I want to convert to usb drive a model pa2669u fdd . are there any converting cables for this? thanks joe shimchick

there is no manual,

Tape-2-MP3 Converter/Player
Convert your cassette tapes to Audio CD or MP3 files with 3 simple steps! Connect portable cassette player/converter to PC or Mac via USB cable. Transfer by Installing provided software and simply press "RECORD" while playing the tape. Create MP3 files from transferred audio to burn to CD or import to iTunes for use on your iPod device.
USB-to-Computer Recording
Convert from cassette to digital formats directly to your PC or Mac computer via USB cable and simple Audicity® software, both included.

Hi Skuddle.
Try looking on eBay and Amazon, you can usually find what you are looking for. You should be able to find something, if not Google it. Hope this helps.

Are you connect to pc or laptop? if to pc, you can try remove floppy drive ext casing and plug with ide cable  to motherboard and plug to power also. If not, you need to find converter for that. it is to difficult to find this converter as long today many people already dont use it. What ever, you can find it through online.

check this :

how to convert to usb

floppy converter
fdd to usb

FDD CONVERTER PART SELL-!!! MAKE SURE YOUR CONNECTER IS MALE OF FEMALE and how many pin it. before buy

Diar sir,I want convert to left to right hand my pajero 2004 (3.2 model).what can I do. thank you.

You need to install a 3-2 wire converter. I suggest a CURT 56175 then
1.Using a test lamp, identify the corresponding wires in the harness for the left turn, right turn, tail lights and brake lights. 3. Temporarily remove the vehicle's negative battery cable from the battery. 4. Using wire taps, attach the input wires of the tail light converter to the corresponding vehicle harness wires identified in step 2 as indicated.
Converter Brown Wire: Tail Light Circuit Converter Yellow Wire: Left Turn Circuit Converter Red Wire: Brake Light Circuit Converter Green Wire: Right Turn Circuit
5. Locate a suitable mounting location for the ground eyelet on the vehicle near the converter on vehicle's frame or cross member.
And your ready to tow!

http://www.amazon.com/Adapter-designed-motherboard-external-connector/dp/B000V6WD8A%3FSubscriptionId%3D0N1YGFKC9QHMHQ9QTDR2%26tag%3Davsa-20%26linkCode%3Dxm2%26camp%3D2025%26creative%3D165953%26creativeASIN%3DB000V6WD8A

Here's the adapter that you need, under $5!!

You need a USB converter for this purpose. It helps to connect standard IDE harddisk to your computer through USB port. You need to connect your hard disk to that converter and it will work just like other mass storages (USB sticks,data travellers).
Here is the Link:
http://www.newertech.com/products/usb2_adaptv2.php

Thanks and Regards.

Try USB2 to ISDE & SATA cable adapter
OR
why not put that 1 st drive into the other computer if compatible.. BIOS should auto detect if it's connected to 2ndry chanel

ok visit this site http://www.byterunner.com/byterunner/category=USB+to+Parallel+Adapters

Hello

I beleave it uses a HD/DD type of disk

Abbr.
Floppy Disk Type
Capacity
Info
SS/SD or 1S/1D
Single Sided, Single Density
100 K
First generation. Capacity varies
SS/DD or 1S/2D
5-1/4 inch Single Sided, Double Density
180 K

DD/DD or 2D/2D
5-1/4 inch Double Sided, Double Density
360 K
Most common type in the early 1980's
DD/HD or 2D/HD
5-1/4 inch Double Sided, High Density
1.2 Mb

DD
3.5 inch Micro Floppy, Double Density
720 K
Hard plastic case
HD
3.5 inch Micro Floppy, High Density
1.44 Mb or
2.88 Mb
Hard plastic case