Coleman powermate generator model #pm0545003

The part No you need is
493988S Cap Fuel Tank

Try this link. The model number will most likely be on the endbell of your generator.

http://www.powermate.com/productmanuals.php?cat_id=3

check your AVR card...if the brushes are fine...

Huffy is making the coleman generators now.

Try this link. The model number will be on your endbell.

http://www.powermate.com/productmanuals.php?cat_id=3

Take the pulley to any auto parts store and they should be able to match it up. good luck.

Hi,
I wrote an answer that was for powermate generators, but it should help you too. I think you have a brushless generator, and rather than the plastic endbell I mention in the post you have a metal pie plate held on by 2 phillips head screws (yours is easier to get to)

Rate me if this helps, ask directly if it isn't enough,
Carl

To find a manual for this generator go to powermate.com and search your model and serial number. Good luck!

1 - Check the circuit breakers on the front of the panel where the outlets are located.
2 - Make sure the black molex plug on the back of the panel where the outlets are located is plugged in securely.
3 - Carefully take the plastic endbell off the generator ( you'll need a 7/16 inch wrench and socket) and look for broken or missing brushes, broken wires, etc.
4 - If you're not up for #3 take it to a good repair shop. :-)

Try this page http://www.arkansas-ope.com/COLEMAN_POWERMATE_GENERATOR_IPLS_LISTING.html.

i know powermate company went out of business, think they sold out . see if this will help. go to the bottom of web site page if you cant open your part number. let me knoww if this helps. thanks, troy