How do I Adjust the Printer Margins for Dell 1720 I am printing on insurance forms and the print is too high and to the right

Guess you are not using the same page size as the one you've got configured in your computer for printer. ie: you are using Letter and printer is configured to A4

Hi

By spacing, I assume you mean the margins at the centre.

The default margin settings are not the same for the right and left hand side of the page, so the printing on the reverse side is offset from the printing on the first side.

The right margin is always wider to allow for punch holes in file paper.

It is not the printer settings you need to adjust, it is the page layout of your word processing software.

Adjust the margin settings manually. In MS Office 2007:

Page Layout > Margins > Mirrored Margins.

Hope this helps.

If you are preparing to print a document that you have created in Microsoft Word, you may be concerned that all the text on the page will print exactly as you see it on your screen. This is not always the case. You can adjust your print margins to ensure that your text prints on each page exactly the way you would like it to appear.

Opening Your Document
Open your Microsoft Word document by double-clicking the Word icon on your desktop. If you do not see the icon on your desktop, then you can locate it where it is buried on your "Start" menu. Click "Start," followed by "All Programs." Then click "Microsoft Office," followed by "Microsoft Office Word." A new document will open on your screen. Click the "Office Button," followed by "Open." Scroll through the files listed, and double-click the one you would like to print. It will open on your screen.

Check Your Margins
By default, your page margins are set to 1-inch margins on the top, bottom, right and left of your page. You can check your margins or change them by clicking "Page Layout," followed by the "Margins" button.

Select New Margins
Select a different margin size, such as "Narrow," which indicate 1/2-inch margins, or "Wide," which indicate one-inch margins on the top and bottom and two-inch margins on the left and right. You also can select "Moderate," which indicate one-inch margins on the top and bottom and 3/4-inch margins on the left and right. Finally, you can select "Mirrored," which indicates one-inch margins for the top, bottom and outside. The inside margins are set at 1 1/4 inches.

Print Your Page
Print your page. Press "Control" plus the "P" button. The printer dialog menu will come up. Make sure that "All Pages in Range" is selected. Press "OK." If your printer cannot print your new margins, then a new menu will pop up telling you to adjust your margins.

I hope you find it very helpful. Best regards.

select file at the top left hand corner of the page from the drop down list select page setup you should see a margins box you can make your adjustments in this box left.right.top.bottom also you might select print preview where you can look at the size and detail of the document you are about to print
hope this helps

It can be the margins set within the printer defaults or the margins set by Quicken. In your print preview within Quicken you should be able to see where the margins are set and adjust accordingly. Otherwise, you may need to go to your Epson's print queue and adjust the properties directly on the printer. A nice way to check it is to see if you can print some test checks to plain paper and adjust as you see fit!

You need to visit the Printer in Control Panel - Printers and double click on the 1720 icon and go through the setup tabs and select Duplex Printing. If you only want to print duplex occasionally you can select duplex from the print options presented when you print a document by selecting the Preferences or Setup button when the Print Dailoig box appears.

Go into your printer software before printing, tell the software what you are printing on letter, 4x6 labels etc.... then print

You need to adjust margins in whatever program you use to print from. Best way is to go File>Page Setup and search for where it sais margins.

Continuous forms paper fed through the front of the printer also uses either the Front Push, Rear Pull, or Push-Pull tractor configurations. Make sure this is set correctly or it will reverse your margins.

It could also be your software. When you print through windows it's using the Microsoft system font controller, but your software could be setting font, margins, and alignment by the settings in the printer not in the driver. So if the first doesn't work, set your system back to align left then go into the printer configuration menu on the device and adjust the margins there.

You can get a usb adapter to printer comp ports on ebay eBayeBay