Mouse pad just stopped working on start-up today. Works with external mouse. Pad and left & right buttons just dead.

-If me I'll buy a new mouse.

Good luck


Mai

To access Mouse Properties, select Start - Control Panel - Hardware and Sound -Mouse.

Use Mouse Properties in Windows to customize settings for pointing devices, such as button configuration, click speed, and pointer options.

My i608 pen stopped working today. I've had it for a month. The mouse was working fine, but the pen wouldn't work at all. Then I left the mouse on the pad and used the pen while the mouse was on the pad, and the pen started working again. Now it works even without the mouse on the pad. Did it re-establish the radio connection or something by doing that? Anyway, saved me the $25 replacement cost.

Try an external mouse and see if gets the same problem - if it does, then it's not the mouse pad.

try it with toggle keys it may be work

Use a mouse :)

the right mouse button don"t work.

f the left-click button on your touchpad has slowly stopped working and now will not work, well, it's just dead. However, do the following.

Go into your Control Panel and make sure your Mouse Settings haven't been changed.

If the settings have not been changed, you have two options. Either use an external mouse like you've been doing or ship it back to the manufacturer to get it fixed. Using an external mouse sounds like the simplest plan, though.

Hope this helps.

Will your laptop work properly with an external mouse? If so, check your touchpad settings in "Control Panel" by selecting "Mouse". Here you can reassign your Buttons. Try setting your Right Button function to "Double Click". If the "Double Click" function works on your Right Button then chances are you have a problem with your Touchpad Assembly which means it will have to be replaced. Dell refers to it as a "Palmrest" which they will replace if still under warranty.

you may wish to go to the acer website and look up that model... download the driver for the touchpad and buttons again. reinstall that and see if it fixes the issue

Robert