Shots taken Hi there, Please could you help everytime i take a shot a display / information about the shot taken appears on screen, it makes it difficcult to see the shot i`ve taken. How can i stop this display from appearing in the window everytime i take a shot? Thank you for your help.

CCD is gone replace it

for all those who c.32.01 error is an error related to contacts camera card reading virtually fail to read the card. for this problem must disassemble the camera and exert a little pressure on each contact then to reinsert the card and restart the camera

Hi. In Scene>panorama assist, a grid is shown on screen and things get confusing!

1. The initial choice needs to be made between

left >right (for a sequence of shots made while 'panning' towards the right)

right >left.

down >up.

up >down.

e.g. if 'left >right' is selected:-

2. After the first shot has been taken, a preview is displayed without the grid.
- the 1st shot can be cancelled with 'retake', or saved for the sequence with 'next'.

3. If 'next' was selected a 'ghost', of what was in the right hand panel of the 1st image, will be shown on the left as an overlay in the LCD display, together with the grid.

The camera can now be panned to the right to try to align the ghost of the right part of the 1st shot with the left side of the new view. The 2nd shot can now be taken,

The combined image is shown, without the grid, which may or may not show good alignment of the 1st and 2nd images - so you can choose to 'retake' the 2nd image, or choose 'next' again.

If you choose 'next', it's back to no.3, above

....and so on until you choose exit, when the sequence can be transfered to PC for stitching with an image editing program.

Hope that helps!

Go to the device mananger. Hold down the windows key and press the Pause/Break key. Go to the Advanced Tab, Then Settings under Startup and Recovery.
You can uncheck to display the startup menu and you can also edit the boot.ini right there. If you need to take a screen shot of it, press the print screen key, open up Paint and choose paste. Once you have the screen shot you can host the pic at imageshack and then post the link here to the pic.
KTTD

hello ,
when i start my sony ericsson k 550i cyber shot a message is displayed on the screen that, "configuration error. please contact your network operator or service centre.

Hi - You can download the manual by clicking the link underlined in blue below:

Caplio R4

See page 71:



Please take a moment to rate this solution & let us know if the information given was useful to you - Good Luck!

Informatica

use lithium batteries. They last longer

Solution:
Ebay has used cameras (DX4530) for about $75.00 with shipping. Kodak's repair service for these cameras is done by mailing in the camera -- and the baseline starting price is about $140.
I'm planning to go to Ebay and buying from a seller with a good track record and reputation.

Hi,

Try this recovery software.

http://www.recuva.com/

This sounds like it might be a defective CCD imager. If so, Sony should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following link for more info:

http://camerarepair.blogspot.com/2007/11/sony-konica-minolta-cameras.html

Applicable cameras include:
Cyber-shot DSC-F717, F88, P10, M1, P12, P2, P31, P32, P51, P52, P7, P71, P72, P8, P92, T1, T11, T3, T33, U10, U20, U30, U40, U50, U60, V1

CD Mavica MVC-CD250, CD400, CD500, and FD Mavica MVC-FD100, FD200