When I turn on my Philips lx8500w dvd player my wireless internet stops working, what may be the problem?

Try doing a factory reset on the unit see if that clears the problem.

if there wireless you need to make sure the two signal strengths are connecting to each other for that there is a testing kit you can get but its very expansive. If these are new and you installed these your self check your main raido and make sure all wires are hooked up properly, it could be the main box giving an issue with the signal.

normailly you must go to the menu. Read you instr. manual coming from DVD blue ray. Download from www. fitness.manualsonline.com
God bless you

Philips DVP3020 does not support popular vidoe formats such as DivX / xvid / mp4. so if you download movies from the internet and burn to a DVD, chances are it will not work. this philips player is very basic and can only play regular DVDs, VCDs and audio CDs. that is why it is cheap. you should try Philips DVP 3010 or 5140, even better the 5960.

@Eltell199,

Hi,

I am having the exact same problem. Did you find a solution fro this?

Ad

email: [email protected]

Philips DVP 5990

How To Make Region Free:

press Setup
select the Preference Tab
Press 1 3 8 9 3 1
Press up/down key to select "0"
and press Setup to exit.

If you can't get into Preferences Tab, you may need to press the stop button twice first, then press setup.
(:-)

This is not guaranteed to work but there are two process's that may work for your Philips dvd player. Below are two region hacks try them and let me know if they help.

Process 1
OPEN TRAY, PRESS 'STOP' BUTTON, THEN PRESS 7,3,4,4,6,6. ENTER '0' FOR REGION FREE, AND PRESS OK BUTTON

Process 2

Turn your DVD player

On

The display will show you no disc

Press Play and then press 1, 5, 9 on the DVD Remote

On DVD display will appear ------ -----

Key in 101 040 000 140 on the Remote when you press the last digit you will see a little point

Press Play

The player will be turned off

Your DVD is ready

Hope one of these work for you, Thank you for choosing Fixya! Feel free to leave a positive rating if this solution helps you.

take the dvd out and hold the stop button on the dvd player for 5 sec (not the remote) the dvd player and that will work

This is how to make Philips DVD 622 region free so that it can play VCDs from all regions.

*Open CD tray by holding down "stop" button on the remote.
*Enter 2812
*Hold down "OK" button on the remote till 9 appears in the TV screen
*Turn off power of your DVD player
*Turn your DVD player on and it is region free now

I have finally got my rear speakers to work. wireless internet or cordless phones will stop the speakers from working, i switched off my wireless internet and hey presto speakers work fine, i just cant have both at the same time.