Car stereo installation diagram

Go to web site for unit's manual . It will have the wiring schematic for you.

Easiest to replace would be the factory Delco AM/FM CD...plug in to existing terminals. If wires cut, you should include the plug in terminals with the replacement radio...Local Pic-A-Part is my go to salvage yard radio $25-$75...Walmart also sells radio wire install kits...$14.95? Hope this helps.

If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box and press "Enter".
http://electronicshelponline.blogspot.com/
Wiring diagram to many popular car audio systems are given.

I would get an stereo installation kit from Auto Zone or a local automotive audio store. It will come with the surround for the new stereo to fit where the old stereo went, and a wiring harness to hook the new stereo up to and plug into the existing car wiring.

My friend have in car panasonic Cq-vx 100u them forgot the code. now Ineed a defaul code please sir.

http://service.us.panasonic.com/OPERMANPDF/CQC1103U.PDF

That's the manual and should give you all the wiring as well as operating instructions. Hope this helps. If you need further help, post a comment and I can help you more.

Hello capello,

Here's a link to the Camry color codes:

http://www.modifiedlife.com/1993-toyota-camry-car-radio-stereo-wiring-diagram/

If you do not want to cut or tap into the vehicle wiring, you should buy an aftermarket adapter harness and splice the wires from it and from your Panasonic CQ-C1100U together.

The Scosche part number for your Camry is TA02RB. Wiring harnesses are also made by Metra and others. Here's a link to the Scosche part:

http://www.bestbuy.com/site/olspage.jsp?skuId=9074137&type=product&id=1218016141744&ref=06&loc=01&ci_src=14110944&ci_sku=9074137

Hope this helps.

Will this help?

http://www.ehow.com/how_5829_wire-car-stereo.html

There is for sure a hook up problem my friend. There should be a memory wire that always has power to it even when the car or the ignition is off. Then there is a switched type wire that only comes on when the cars ignition is on. Check both of these wires in the car. Check the car wiring diagram to confirm this. To confirm the wiring in this vehicle, I Good Luck with this install. And if all else fails, don't take a chance and blow out the unit, take it to a pro to be installed. Good Luck found the right wiring diagram for your car. Confirm this wiring diagram with this one you have. Go here:http://www.the12volt.com/installbay/stereodetail/955.html