Password Error I must have accidentally reset my 4 digit password. Now I just get an error message when I enter my password. Is there anyway to reset the camera to the default "0000"

For $20 Unlockbiosrecovery.com will supply you with the Dell master password to clear any bios password set. For your model enter 3 wrong passwords and you will get a system disabled message with a 5 digit error code. That 5 digit error code is what you need to submit at http://unlockbiosrecovery.com/Unlock_Dell_Bios.php
They guarantee it to work or your money back.

have you tried a hard reset and by removing the date batteries?

that type of reset may help you

Try first removing battery and putting it back in, to see if it reset the camera

This is from a factory repair and maintenance manual for Acer Aspire Laptops. It may work for you.

Forgotten Hard Disk Password
When the user keys in the wrong password three times, an error message appears. The user must now reset
the password.
1. Make a note of the error code that is displayed with the error message.
2. Run unlock6.exe from the DOS prompt in the following format:
unlock6 XXXXX 00
(XXXXX = HDD password error code, 00 = CRC base - default is 00)
3. Select Upper case ACSII Code from the screen that appears. The HDD master password is displayed.
Make a note of this password.
4. Reset your system. When the Enter Primary Master HDD User Password prompt appears, enter the
password you made a note of in step 3.
Resetting a BIOS Password
The user can reset a BIOS password using the clnpwd.exe utiility.
1. Copy clnpwd.exe to a DOS boot up disk (or flash drive).
2. Boot your system in DOS mode.
3. Execute clnpwd.exe from the boot up disk (or flash drive).
4. Press 1 or 2 to reset the required password as shown on screen.
5. A confirmation message appears when the process is successful.

Feature 981 will get you into the mailbox. You may or may not need the password though.

0000

If your company extentions are 2 digits long enter "120000"
If your company extentions are 2 digits long enter "1020000"
If your company extentions are 2 digits long enter "10020000"

cannot reset to the default password

We can't enter a new password in our camera. It always shows error.

To reset the password:


Turn unit on and wait for password prompt
Depress the and hold the enter button until camera


switches into 5-digit password mode _ _ _ _ _.
Trail sentry systems will not indicate 5-digit mode on the screen, but will indicate _ _ _ _ instead of HHHH .


Press enter to confirm 5 digit mode


Enter 5-digit code 66214 and press enter button( trail sentry cameras will accept a 5th Digit after the 4th digit is entered in the _ _ _ _ screen.


Camera will now go into operating mode, and user can now program a new password from the setup mode