Had a new battery put in my car and now when I press source only the CD and FM show up not the AUX for my iphone. Cant figure out how to get the AUX programmed back in there. Its JVC stereo KD-G310.

u should be able to change from am/fm radio cd and aux in if the source changes its working

What's not explained in the manual is that you need to do this while in the clock setting mode. Radio OFF/ press and hold SOURCE/ while in this mode, press FUNCTION to scroll thru the auxiliary inputs/ press ^ & v to turn on and off/ SOURCE to exit.

There is a button that should say SRC or Source. Pressing it scrolls through the modes. Press once to move to FM, another time to move to Satellite, etc.

Stop when you get to AUX.

Sorry, but I don't think you can use the rca's for an aux-in. I bought a deh-10 new and there is nothing in the owners manual that even mentions useing the rca's for an aux-in.
Used it long enough to opperate it in the dark and nothing in the setup menues for changing those rca's from outs to ins.

Quickly piush and release the source button if you hold it down to long the radio will turn off

Hi there
hold down the source button to turn off the unit (unit must be off)
now hold down the function button till it beeps once it has done this press the function button i think 3 or 4 times and you will get a message on your deck unit saying (aux - on,off) turn on and press the source button to turn the unit back on to the CD or radio now press source button2 or 3 times till Aux shows up (press means push it let it go) (hold means don't take your finger off button)
hope this solves your problem

it should be in aux try to press source buton and see if that is an option if not an alternative is to hook it up on the back of the cd player in the audio in or aux or aux 2 using a wire adapter from walmart in the car sterio section

did you turned aux function?

turn off your player by pressing and holding volume controler.
press and hold longer (~5 sec) it again to turn it on (you should see 'tuner' in the lcd).
push up arrow to select aux and right/left to turn it on.

now you can connect your ipod and select aux (as ussual switching between tuner/cd player/aux)

cheers :)

I enabled the AUX as a source by pressing and holding the menu button (located to the left of the volume knob) then pressing the control knob up till I found the AUX options and put it on AUX2 so I wouldn't hear the audio feedback.

Hi nhmteam. I have the solution for you: 1. With your DEH-P3000 turned off, press your FUNCtion button. It's a tiny button towards the upper right of the faceplate. Hold it down until you "ALARM OFF" or "ALARM ON" on the display. Release the button. 2. Press the FUNCtion button again and you should see another feature. I don't remember how many features you need to cycle through, but keep releasing and pressing the FUNCtion button until you see "M-CD ON" on the display. If you miss it just keep going and eventually it will come back. 3. On the right side of your faceplate there is a button with 4 arrows. You will need to push the up or down arrow until the display reads "M-CD OFF". If your display already reads "M-CD OFF", kip to the next step. 4. Press and release the FUNCtion button again and you should see "AUX OFF" on the display. Again press the up or down arrow until the display reads "AUX ON". 5. Now, turn on your unit, then press the INPUT button until the display reads "AUX". You are now ready to use your iPod in the way you always did. Keep these instructions for the future since I believe every time you disconnect the unit from the battery the unit will reset itself and disable your iPod cord. Best regards - TomR