DE code comes up repeatedly; nothing wrong with door.

You have not included the Make and model of your washer. Below is a google search for Washing machine error code de
This refers to a Samsung washing machine.
I suggest that you edit your question to include both the Make and model number. This question has been answered before on FIXYA for a samsung washing machine. Link included below. dE
dE1 Ed Door issue ·Check that the door is closed fully.
·Check nothing is trapping in the door.
·Check unit is not overloaded.
· If problem persists please call the customer support team.


Samsung washer machine error code dE

OK if nothing has Struck the door (Like a foot...etc) then that is OK. If water is not draining, Then it is the Drain Pump. About $30 on Amazon. It needs to be replaced cause it is bad and is causing these other issues. Unplug the machine and disassemble it, replace pump and reassemble. If this is above/below your pay grade. Then call Sears and have them do it for around $130.

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_b77d19396bfe2249

DE is for a door lock error and you will need to replace the lock. Here is the part to order.

DE indicates a door lock error.

Either the door lock, wiring or main control board can cause this fault. The door lock is relatively inexpensive so it would be worth trying a new door lock first.

Check the wiring between the door lock and the control board. If a new door lock doesn't fix it and the wiring is ok you are only left with the control board.

Hope this helps.

DE error does mean the door latch,but there are three parts that could cause the error code.If you have changed the door lock already then the main p.c.b/computer board has failed and not registering the door lock but there is a 5-10% chance it's the wiring connecting the two parts together.So basically you need to change the main p.c.b & if that doesn't work it needs to be rewired.unless you know how to use a multi-meter then you could test the wiring for a definate answer.THANKS ECO KIZZA

hi from what i see on my LG code it means drain error. not fully drain within 10 min. i would check your strainer

HI, this is a Door Open Error.

Possible Causes are..-

* Door not all the way closed
* Loose electrical connections at door switch and pwb assembly(Control Board)
* Door switch assembly is out of order(Miss aligned)
* Gasket on door may be creased in

Most common issue here will be a defective door lock switch. check all causes before replacing the switch.

Try this: clean out the chamber, then set the grinds coarser to see if it makes a difference. If it does not then the micro switch or solenoid that controls the door is broken. Check resistance on solenoid it may need to be replaced.

That is a door switch error problem.  The door latch is not sensing the door closed.  You may need to replace the door latch assembly.