Need help with same prob you had with tv

double vision in a rear projection tv has several reasons. one is convergence magnets are out of tune. u need to tune them which is back side of picture tubes. u please observe that which color is producing the double vision. the lens are firmly fixed & therefore need not to adjust. other option is to adjust the convergence of tv by going to service mode by remote.

I have a 60SBX72B and the colors are all separated like triple vision. Is there a way that I could fix this

yes the convergence problem leaves a shadow of red or blue like an outline around the picture, sometimes part of the screen some times the entire screen.

Its failure of convergence ICs and will be replaced.
Convergence ICs are mounted on silver heat-sink on D board of TV
Let me know exact model number to help you with more technical info.

try the magic focus.maybe it will work.

http://www.avforums.com/forums/showthread.php?t=384717&page=8
this will fix it i have the same tv and it fixed my i have a prob my tv has gone dark and can not c the pic i had to put the brightness up just to c it

you need to replace both convergence ICs they are STK392-110 you can get replacment ICs at the following link with free instalation intructions with pictures. Here is the link.
http://servicemanuals.vstore.ca/

This is a convergence problem and is either bad connections at the convergence ICs or defective ICs. If you can solder, you can repair this yourself. Let me know if you wish to repair this and I can provide you with additional details.

Dan

you need new convergence ICs. what is the model number of your set? Let me know the model number and I will be able to help you

This seems to be a convergence failure on your TV.
If you have hand basic soldering skills and a soldering iron, this might be something you can do.
Check this link for the parts you need.
Goo Luck.