Cleaning Challenge to Resolve Error Msg. 2 on my 560 iRoomba

Hello, this is Ava with Think Crucial.

To fix any noise problem, a proper maintenance will do the trick. Most of the time cleaning the filters, checking for blockages and clearing the passageways, and cleaning the brush roll assembly will resolve this. And if after doing maintenance it is still the same, that replacing the parts will most of the time make your vacuum work like brand new. You may refer to your User's Manual on how to clean and maintain your Dyson cleaner.

You can purchase a wide variety of high quality Dyson replacement parts for your Dyson vacuum direct from Think Crucial with free shipping and an exclusive 10% coupon for Fixya.com readers, use code: FIXYA10

https://www.thinkcrucial.com/search?type=product&q=dyson

I hope this was helpful.

Ava B.
Think Crucial Customer Care
http://www.thinkcrucial.com/

good luck

Take any removable parts out of the chamber....if the chamber is
not removable use a duster to clean.

Make sure the cage is closed properly

You will need to take the top off to clear those wheels.
This happens a lot when cleaning new carpet. The fuzz jams the wheel switch, and dosey do you go.

You need to clean the gears hidden in the housing itself. they have become clogged with hair etc and wont turn.
This will require you to remove the housing.

I had the same problem. You must clean this parts and inside this parts:

Remove hair with cleaning tool
Remove Roomba's brush bearings
Clean Roomba's brush bearings with cleaning tool

the mechanisam that makes the brushes spin are broken. take it into a shop dont fool with a roomba

How old is your roomba? If it is still under warranty maybe they will send you a new battery. When mine did this I replaced the battery with a new one and that fixed the problem.

The iRobot website has all the manuals under their Troubleshooting section.