How to change clock hands

Press and hold the button on the upper left until it displays "HOLD" then wait 'til the light goes out, you'll see the hour-digit blinking, set the hour you want, then for the minutes, press the lower left button. Press and hold the upper left button to set the desired time.

Go to "www.tissot.ch/" and at the bottom of page, click on "warranties".

Click on "user manuals" and enter details of your watch.

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all Casio watch manuals. Rate me, plz.

You can get an instruction manual from acctim



http://www.acctim.com/support/index.php?p=instructions

Paste this link into your browser:
www.nike.com/timing
Choose country and click on CATALOG, then on IMARA, then on IMARA KYLO and then on PRODUCT RESOURCES box.
Here you can download users manual for your watch.
P.S. I was just wandering what seconds hand you were speaking about? This model is purely digital.
Do not forget to rate, please.

I lost my instruction and need to set my watch to the correct time. It is a casio illuminater AW-80

Same just happened to me, performthe following:

The analogue hands are not precisely synchronised with
the digital time?

1. Press the lower right button to move the mode indicator
hand to CHR.
2. Pull the lower right button out one click. The hour, minute
and UTC hands will retract towards the straight up 12 O’clock
position. You will see UTC on the top half of the digital display.
3. Press the upper right button to advance the hands to the
straight up 24-hour position. Use the lower left button to go in
reverse.
4. Press the upper left button. You will see HR on the top half
of the digital display. Press the upper right button to advance
the hour and 24-hour hand clockwise until they both point
straight up at the 24-hour position. Use the lower left button to
move the hand anti-clockwise.
5. Press the upper left button. You will see MIN on the top half
of the digital display. Press the upper right button to advance
the minute hand clockwise or the lower left button to move
anti-clockwise until it is pointing straight up at the 12 O’clock
position.
6. Push the lower right button back in one click.
The watch malfunctions in some way and the above
procedures do not work.
1. Press the lower right button until the mode indicator hand
points to TME.
2. Pull the lower right button out one click. Press the other
three buttons down simultaneously for three seconds and
release. You will see 8’s on the digital display.
3. Press the upper left button. You will see UTC on the top half
of the digital display. Press the upper right button to advance
the hands of the top dial to the straight up 24-hour position.
Use the lower left button to go in reverse.
4. Press the upper left button. You will see HR on the top half
of the digital display. Press the upper right button to advance
the hour and 24-hour hand clockwise until they both point
straight up at the 24-hour position. Use the lower left button to
move the hand anti-clockwise.
5. Press the upper left button. You will see MIN on the top half
of the digital display. Press the upper right button to advance
the minute hand clockwise or the lower left button to move
anti-clockwise until it is pointing straight up at the 12 O’clock
position.
6. Push the lower right button back in one click

Use this page to download a copy of CASIO watch manuals in PDF format. To download a PDF file, enter the four-digit (or three-digit) module number marked on the back cover of your watch.

http://world.casio.com/wat/download/en/manual/

You will need a pdf reader on your pc, you will find all instructions in there.

If you don't have a pdf reader you can get one from
http://www.foxitsoftware.com/pdf/rd_intro.php