I have a cello tv model no E1906DVB the on and off light just keeps going from red to green and wont switch on

Contact them direct for warranty replacement

Home - Cello Electronics (UK) Ltd

celloelectronics.com

THIS CHRISTMAS. say hello Cello to our Android TV. View range ... Be sure to activate your guarantee for your new Cello product. Simply go to this page and ... ‎Televisions · ‎About · ‎Contact · ‎Instruction Books

..

I am surprised you have just bought a CRT TV. You will need to get back to the maker or supplier

good news and glad you fixed it--welcome to the world of TV repair.

Hi Dolly,
My cello is doing this as well.....have you had any luck?
LJ

I had this same problem with my 23" cello TV. It was a problem with the internal power supply - specifically the 12V output. It had fallen to 5V. I noticed that the three electrolytic capacitors (EC7 EC8 & EC9) had bulging tops as though they had been damaged. I replaced these and my TV is now working again although I don't know how long it will last. The three capacitors were 1000uf 16V types. I replaced them with 35V versions (which are physically bigger and a tight squeeze). Your TV repair shop should be able to replace these faulty components in under an hour.

Replace the lamp would be the first thing to try. Lamp door switch on this model is notorious for going bad. If you replace lamp and still won't turn on jumper door switch. If you take off back you can see switch board.

I found your site confusing. If you had read my post, you would have noticed that my problem referred to a 15" flat screen 'CELLO' .TV/DVD combo. I had sound but no picture. When switched on, the screen lit up and the word CELLO appeared then the sreen went black

Hi Johnpb54,

May i know, what's your lcd tv brand and model? When the light change to red color, is it a steady light or blinking light? Or you need more info on repair lcd tv, please visit this site http://lcd-television-repair.com .It may be can help you solve the tv problem.

i have a nlc-3204bc funai hd ready, the stand by light keeps flashing red on and on, can not switch it on