Lands Phones Logo

Related Topics:

Posted on Mar 09, 2008
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

I HAVE RCA EXECUTIVE SERIES FOUR LINE SYSTEM PHONE. I HAVE BEEN USING HEADSET QUITE A WHILE AND IT DOES NOT WORK AND ERROR MESSAGE SHOWING AS " INHIBITED". WOULD YOU HELP ME TO SOLVE MY PROBLEM AND I CAN USE THE HEADSET FUNCTION AGAIN. TOM HASEM TRAVEL

  • 2 more comments 
  • hansemtravel Mar 09, 2008

    I have not seen any other error message.

  • hansemtravel Mar 09, 2008

    I hang up the phone and tried to use phone again and the heaset would not work.



    oh I remember low battery message was there too.



    Tom


  • hansemtravel Mar 09, 2008

    the model no : 25414 RE3-A

    Serial no : 60005576



    Thnkas



    Tom

  • hansemtravel Mar 09, 2008

    the power is connected and still I have a message saying error : inhibited



    I have to go now I will contact again thanks for your help



    Tom

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Brigadier General:

An expert that has over 10,000 points.

  • Lands Phones Master 3,614 Answers
  • Posted on Mar 09, 2008
Anonymous
Lands Phones Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Brigadier General:

An expert that has over 10,000 points.

Joined: Jan 15, 2008
Answers
3614
Questions
24
Helped
1009217
Points
10054

Until when you had never use the phone?

  • 6 more comments 
  • Anonymous Mar 09, 2008

    any indicator's aside from error message you see?

  • Anonymous Mar 09, 2008

    Describe please when the error message pops-up or occur, on what kind of operation or function you are doing on the phone and give's you the error...

  • Anonymous Mar 09, 2008

    ok.. copy that!



    can you give the model and the brand of the phone. i'll see right where you could possibly reset the phone.

  • Anonymous Mar 09, 2008

    bullseye! OK i got it now.



    If the power cord is not plugged into the unit, and the battery is available, the unit enters Battery Operation Mode. In this mode, the

    unit fully supports all operational features, except the intercom call function.





    NOTE: Under battery operation mode, the RF module (optional for use with cordless handset) is not supported.

  • Anonymous Mar 09, 2008


    NOTE: If the headset is not connected (or if not completely inserted into headset jack), an error tone is heard when the HEADSET button is pressed.

  • Anonymous Mar 09, 2008


    For Restoring the Default Settings of your Phone:



    This feature allows you to reset the menu to the original factory default settings.



    1. Press the MENU button while in standby mode.



    2. Use the < REVIEW > button to scroll to RESTORE TO DEFAULTS.



    3. Press the SELECT/SAVE button.



    4. Use the < REVIEW > button to scroll to YES or NO.



    5. Press the SELECT/SAVE button to save.



    Enjoy!

  • Anonymous Mar 09, 2008

    ok.. i'll post here many option's that you can do when your back.

  • Anonymous Mar 09, 2008

    Take care & God Bless You..

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

How do I reset the message indicator light?

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.
2helpful
1answer

Missage light blinking

You have unheard messages on the voicemail system provided by your telephone company. This system records messages when people call while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.
0helpful
1answer

We have RCA executive series 4 line telephones. Is there a juction box that we can install to make this system work?

The RCA 4 line phone uses 2 standard telehpone jacks. Line
1&2 on the first jack and lines 3&4 on the second jack.
4helpful
1answer

The message is blinking but there is no new message. I have a rca executive series 25414re3a phone with 4 lines

I inherited this phone,; how do I check new messages when the message is blinking? I don't see anything that says play.
0helpful
1answer

I'd like to record an on-hold message.

You'll need an aftermarket adapter that senses the voltage shift in the line, triggering a 24/7 music feed. The RCA series don't have a music-on-hold capability. www.skutchelectronics.com is the best hardware solution, or using www.holdtimestudios.com to put a studio package together with hardware.

Patrick
0helpful
1answer

Have an RCA executive series. the light for the

I have an RCA Executive Line 4-line phone. I was away for a week, and came back to find the speakerphone when I dial out is significantly muffled on some of the lines (people that I am calling complain of noise on the line). If I take it off speaker, the quality on the handpiece is normal. First, I thought it was the batteries, so I replaced them. Didn't change. Is there a reset? Is the phone (base) after less than 1 year defective?
7helpful
4answers

RCA Executive Series 4-line model# 25413RE3-A

I was having the same problem...no caller ID. Then I looked up the phone on the RCA site:

http://www.rca4business.com/products/pc/viewPrd.asp?idcategory=22&idproduct=11

Turns out there is no called ID on this model =(
0helpful
1answer

RCA executive series

No ringer could well be a setting and light on 2nd line means their is No 2nd line and most 2 to 4 lines phones at least require 2 active lines for the system to work correctly
6helpful
2answers

I have RCA Executive Serices 4 lin system Phone and I used to use headset all of sudden I hace message saying " Error: inhibited ". Would you plaese help fix my problem. Thanks for your...

Tom,

I had the "error: inhibited" problem with my RCA 4-line Executive Series phone as well.
When I checked the line from the phone to the wall outlet, I saw that it had come undone.
After I plugged the phone back into the wall, it started working normally again.

I recommend substituting in a different, known-good telephone to see if that works.
If you can't get any phone to work plugged into that extension, then the extension is dead.
If another phone works but your RCA still will not, then the problem is with the RCA phone.

A similar idea is to try moving your RCA phone, substituting it in place of a working phone.
If it works in room X but not in room Y, suspect the phone wiring running to room Y.

This phone employs a common but awkward means of wiring up lines two and four.
Line two is wired to the wall by piggybacking on the patch cable used for line one.
Line four is wired to the wall by piggybacking on the patch cable used for line three.
A phone cord has four wires running through it, but a phone signal requires just two.
The piggybacking technique leverages the cable's free pair to feed a second line.

The upshot is that one can test the wiring for lines one and three with a simple, plain phone.
To test the wiring to lines two or four, some specialized knowledge is needed.
In place of that knowledge, a different two-line phone which also piggybacks might be used.

That's detail you'll need to consider only if your problem is specific to line 2 and/or line 4.

Anyhow, I hope I'm not patronizing by being too simple. But, I had this problem too.
It turned out to have nothing to do with the phone itself; the signal wiring to it was bad.

I realize that this feedback is a bit late and that you've likely already resolved your issue.
Perhaps this feedback will someday help somebody else (since these Q&As are archived).

Regards,

Lincoln
0helpful
2answers

RCA EXECUTIVE SERIES 50029864

If you are looking for a message on hold port, you will not find one. Technically speaking, this is not a phone "system." There are 2 options for using messages on hold with your phones:
1) Using a message on hold player with a built-in adapter
2) Using a message on hold player and a separate adapter

The best option can be a little tricky to determine. We work with hundreds of small businesses that have 2,3,4 line phones and can help you figure this out and deliver the best solution. Please call me.

800-832-4653 ext.240 (Drew, Sales Mgr, Commercials On Hold)
Not finding what you are looking for?

318 views

Ask a Question

Usually answered in minutes!

Top Lands Phones Experts

Cindy Wells

Level 3 Expert

6688 Answers

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...