I am looking for schematics for a Powerware 9125 6000G.

fixya has nothing but advice
go google and type the details in the search box

display bat disconnected

The charger in powerware 9 series 9120 6000i ,the fan is of a quality that it fails and the heat sink does not get sufficient cooling ,it runs on 12 volt ,i replaced it with a cpu fan from a mainboard on a pc and it works perfectly now. make sure that the fan is running else the charger might go in protection or can fail due to the transistor on heat sink fails.

There are numerous fuses (rectifier, inverter, charger, battery) on the 9135 that are located internal to the unit and not readily accessible to the user. Generally a blown fuse is accompanied by another component failure which caused the fuse to blow in the first place. As a result, additional troubleshooting and testing is usually required to identify the root cause of the failure. This of course leads to soliciting the services of a technician who has access to the schematics, test equipment, and parts to initiate a repair. Without the schematics, it's like working in the dark. For complete support, please contact Eaton (Eaton bought Powerware so now it's the Eaton 9135):

Toll Free: 1 800 356 5737
E-mail: [email protected]

www.eaton.com/9135

Try this link to the documentation for the 9150: http://powerquality.eaton.com/Products-services/legacy/9150-info.asp
Eaton bought Powerware 6 years ago but retained their service support personnel.so they can also help you.
Toll Free: 1 800 843 9433
International: +1 919 871 1800
E-mail: [email protected]

Here is the documentation page for the 9150: http://powerquality.eaton.com/Products-services/legacy/9150-info.asp Looks like 28 inches high x 16 inches wide x 29.5 inches deep. 510 pounds (231kg). If you need further support, you can call Eaton (Powerware was bought by Eaton)
1 800 843 9433
E-mail: [email protected]

I need a schematic for a Best Power Unity I UT8K

I hav a smart ups 1000 with 2 batteries are they wired for 12v or series for 24v?

Hi,

Please go to www.powerware.com for manual downloads on most if not all of the the Powerware range of UPS.

Regards
Alan Hood
ami-man
UK