This likely indicates that your USB device(s) is drawing too much power from your USB bus. A possible solution is to purchase a powered USB hub that will draw power from an A/C outlet in your house.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check that you do not have any bent pins in the USB connector. If a USB stick/device is inserted a bad way, then you can bend the pins in the connector.
Error 0701: USB Over
Error 0701: USB Over Current On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00HCurrent On HC/Port - Bus:00H Dev :1DH Fun:01H / Port:00H
Try turning on the computer in safe mode and turn on the computer by pressing f8 and see if that works. check in the bios if the cd drive is detected make sure that the disk you put in cd drive is a bootable disk
I had the same problem on a toshiba satellite u400. Usb over current on port ... blabla.. Please press F1 to resume or F12 to install. F1 just ended up in a screen asking to press F2 or F12 which did nothing. F12 did nothing.
Rebooting the pc ended in a black screen with a flickering HD symbol.
To be able to boot again on the BIOS I had to remove the battery and disconnect the plug. Once It restarted booting on the error USB over current.
Si I took a USB mouse and tried to boot with the mouse plugged in on port , then another ... at the third port the PC booted normally with no error :)
Don't have any idea why it became faulty but it's now solved for me.
One of your usb ports is either damaged or has an object stuck in it causing a short. Unplug all usb devices and look at each port. Note if one looks slightly different from the others. There is a plastic tab that fits into usb plugs. If this tab is bent and touches the side of the port, it can cause the short. If this is the case you may be able to either clean out or bend back the bent tab.
If you have a VISTA DVD, please insert it, and use the BIOS to boot through your CD. Then, when the VISTA installation comes up, press repair. Restart, and try again. Please report back.
×