I wanted to get a copy of a manual for the Pride Legend xl8 scooter please. Thanks

https://www.manualslib.com/manual/134686/Pride-Mobility-Legend-Classic-Xl-8.html?page=33

mechanic is the solution

there is sometimes a cable that u can adjust at the motor break.

hi, can you explain in more detail what information you require ?

The XL8 is one of the best 8mph mobility scooters out there, sadly it been replaced by the Pride colt brand..

Regards

hi, can i ask you what the pot was like , a electronic one or mechanical one ?

If it's Electronic check there is a 24v - + plus voltage on the red and black cable. This is a common problem with these scooters.

regards
www.gewizrepairs.co.uk

Gary,
Have you tried http://www.southwestmedical.com/replacement-parts/pride-mobility?
The gray guy

Hi if when you put the hazzard lights on all the indicators work then this suggests the problem is with the indicator switch, you may need to get it replaced, it could be that it has got corroded due to rain or damp getting in, if the hazzords are working ok then you know the fuse and bulbs are good so all thats left that could be wrong is the switch that works the indicators.
this will need removing and replacing to solve your problem

Hi...

There is a shaft pin under the seat

Pull the arms off ( temporarily)


Lift the seat slightly, remove the pin,lift to where you want it and put pin back in the hole

If this helps , please rate my help

hi, can you send me a picture of this so I can assess the damage, I have repaired many gearboxes so it not a problem.

[email protected]

just remove the NOSPAM from the emaill adress so it correct.

Regards
GeWiz.

This page has a link to the users manual near the bottom:

http://www.cheapest-scooters.co.uk/8mph/pride-legend-classic-xl8-mobility-scooter.html