Pantech c120 - how to go from ring to vibrate or silent without going through the menu?

If you have made sure it's set to ring and/or vibrate and it's still not working, then turn off your phone and take out the battery. Put the battery back in and turn it on, then see if it works. This will probably fix the issue. If you haven't made sure it's set to ring/vibrate, you can do so by going to "Menu" > "Settings" > "Audio & Ringtones" > "Ringtone" > "Volume" and make sure the volume is up and not on silent. You can also quickly adjust this by the up and down arrow buttons on the side of your phone without having to go to the menu. I hope this helps :)

Menu/ Settings/ Profiles/ Highlight either "normal" or "vibrate and ring" then hit Options and go down to customize. *note only normal profile and vibrate and ring profile can be customized, the other three cannot.

Go to menu>my stuff> tools >utilities. Scroll down > my voice.
Then press record .
To set it as your ringtone:
Go to menu, settings, then profiles. Then it takes you to flight mode, silent, vibrate, ring, and etc. On the side it says options. Select it. Scroll down to customize. Then just change the ringtone or scroll down to message tone.

you may have you phone set to a "silent" profile

you need to go into profiles and select a profile you like and then you can edit it (or create a new one)

All you do is go to the MENU then Click SETTINGS then go to PROFILES then click that and then click VIBRATE AND RING then go to OPTIONS then go to CUSTOMIZE then scroll down to where it says KEY VOLUME and put it to SILENT. then go back to OPTIONS and click SAVE and your done. Every key button you press is silent! But im asia and i really like the xenon betta. Oh and im 12 years old!

In the menu, to to "Settings", then "Sounds & Alerts". Put the select bar over "Normal" (if that's the setting you use it on), pressing the "Options" button and selecting "Customize". Find "Keytone Type" and press the left or right arrow buttons to select "Off". Then select "Save". You can do the same for "Vibrate and Ring".

In the menu, go to "Settings", then "Sounds & Alerts". Put the select bar over "Normal" (if that's the setting you use it on), pressing the "Options" button and selecting "Customize". Find "Keytone Type" and press the left or right arrow buttons to select "Off". Then select "Save". You can do the same for "Vibrate and Ring".

go to your profile settings and hilight the profile you want to use such as normal etc. hit menu then edit and change the ring type to vibrate/ring

change the speaker on the phones and also have the ringer check on the main-board.

press the * button and hold it down that should take it off vibrating mode