Yamaha rx-365 reciever not showing all speakers

Greg, It pretty basic hookup,Just hook it up to your speaker terminal on the reciever or amp.To the input of the (Speaker) Selector.

Hello,
To turn on all 5 speakers from your reciever you will want to press the audio selct button on either your remote or on the front of the unit itself. This will scroll through the different sound fields and the easiest thing to do is to look at the front right of the recievers display. While scrolling through you will see the speaker icons and all 5 channels should light up when your on the correct soundfield. Dolby digital 5.1 and all channel stereo are common soundfields that use all the speakers. It is important to remember that your surround speakers are only intended to reproduce sound effects, and not full range audio like the fronts. Of course, if it is your desire you can definately override this.
Hope this helped,
Thanks

Please check your TV settings and the optical cable.
The speaker icons disapper from LCD display when the receiver does not detect any input signal throught the optical/coax/hdmi cable.

Check your "A/B" speaker selector switch on the front panel of the receiver, if they are on, you will see "A" "B" or"AB" on the front display. If they are on, You need to have the receiver serviced. Just a note, Yamaha's rarely have an output problem! Hope this helps

check in the manula setup from the Menu button and press enter it should show front speaker enabled

Stereo sound requires two speakers per room. One for the right channel and one for the left channel.

don't know

a b switch? is pretty common. other speakers work?

I too am experiencing this problem.... and my receiver is only 5 months old. Its a RX-V661

Some systems don't send signal to subwoofer if speakers in SPEAKERS SETUP are set to LARGE, they redirect signal to center and front speakers. Maybe that's problem.