I just need a 2430 dl driver for Imac! - Konica Minolta magicolor 2430 DL Laser Printer

It's part number 4139 1007 03 and I found it at tonervalues.com by Googling. The little extension tab is 4139 1011 02, if you need that too.

As long as the printer actually has a blue-tooth function it should work as its only a protocol. platform shouldn't be an issue as long as you can find the drivers for the printer.. check
http://solutions.konicaminolta.com.au/support/DriverPublic.cfm?

and enter 2430dl -
mac os x-
postscript.

hope it works.

Hello,

I advice you power off the magicolor 2430 DL and power on after few minutes, while the magicolor 2430 DL is loading or booting, pull out the plug from the AC outlet and wait for minutes before plugging it back and power on, if the problem still per, press the stop button for about 5 seconds and release, see what happens, if it fix the problem.

Let me no what happens.

Take care.

click here this is where you can download the drivers

You must install the software before you connect your magicolor 2430 DL Laser Printer . Load the installation software and connect the printer when the software instructs you to.
You can download the driver for Vista 32 bit at
http://onyxftp.mykonicaminolta.com/download/Search.aspx?ht=

Why buy when you can download for free? http://printer.konicaminolta.net/support/current_printers/mc2430dl_sup.htm#drivers

go to www.konicaminolta.com usa and download the print driver.

here is link that you can see what other peopel are doing with this printer regarding WIndows Vista. it also contain a link for driver download.
I don't how good is the driver. but I believe there is workaround.
http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=962&filetypeid=4&osid=17

Hey

in printer menu you have to look up some setting and tell the printer to continue printing when toner emty, you'll find it in gualiti menu or engie menu, i dont remember exactly.
second i think you still need to have all toners installed, if C is installed but shows no toner, then you have to clean chip reader under the toner rack.

This driver is compatible with Mac OS X 10.2.x and higher

here is a link to what you need scroll down to Mac driver


http://printer.konicaminolta.com/support/current_printers/mc2430dl_sup.htm#Drivers