Sharp projector lamp will not come on

Reset the lamp timer.
1,Connect the power cord.
2,While simultaneously holding down "menu","enter" and "down" on the projector, press "standby/On" on the projector and keep all four buttons pressed down until the lamp indicator starts blinking green.
"LAMP 0000H" is displayed, indicating that the lamp timer is reset.

Have a nice day!
We supply original projector parts: lamp, bulb, Lcd panel, Lens, DMD chip, color wheel,
motherboard, powersupply ... with high quality and competitive price.
Jerry
Lampdeng Limited

Replace the new lamp, Green few seconds indicator blinks and then red indicator blinks

look at your lamp carefully to see if you see bubbles in the mirror or anything like that. if so then your power supply/ballast is bad.

I think it's capacitor issue on the power supply board. open it, look for power supply board and fine bloated capacitor and replace it.

It seems front fan or color wheel damage

reset the lamp timer. unplug it and plug it back in. hold down the enter, down, and menu buttons, then press the power button.

Lamp ruptured, now it needs cleaning and new lamp.

if it's under 1 year old, it's still under warranty, so send it in and get it fixed for free.

you need to reset the lamp timer see http://www.ercservice.com/PDF/Lamp-Sharp-XR10-XR20.pdf

Hey, XR10S and XR10SL is the same. The Lamp is SHP93 if for Replacement.