Leaking washing machine

A washing machine that leaks only during the spin cycle often has a leak in the main drain hose.

my washing machine leaks water onto the floor during each spin ...

https://answers.yahoo.com/question/index?qid...
Feb 3, 2010 - During drain and spin only A washer that leaks only during the spin cycle often has a leak in the main drain hose. ... It happened to us due to over loading. ...something can get betwen the two tubs it this all fails your tub seal is ...

Main bearings. Dump it.

What is the model number of your unit?

During drain and spin only A washer that leaks only during the spin cycle often has a leak in the main drain hose. Inspect the entire hose and correct any problem you find.

YES I THINK YOU ARE TALKING ABOUT THE DOOR SEAL IF IT IS A FRONT LOADER IT JOINS TO THE DRUM

it only does it on the small load? does the water drain out before it goes into spin?

The pumps usually have rubber hoses fitted them and they can deteriorate over time, moreso around the clamps that hold them onto the pump. Also, maybe the pump has been slightly opened via a worn seal. Either way, there may be a risk of fire if any water gets onto the electrical connections of the pump or spray onto any other open electrical connection inside the machine. It would certainly be advisable to have it checked with some urgency.

During the final rinse and spin, I would think the pump may not be used during these cycles.

Hope this helps somewhat.

Probably a main tub seal, big job!

Possible that you would have a tub seal leak if it is only noticable during spin cycle. Possible that it "drips" slightly while in agitation, but not enough to notice it. While in spin mode you have a lot more parts moving as well as a lot more water pressure on the seal itself. Pump could also be leaking, but highly doubtful since it would leak a constant amount at all times. Good Luck!!! Jim