Fuser malfunction.
Power off/on while pressing Stop.
Not recommended without having been checked by a service technician since it could result in a fire.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Maintenance call? from your question it is not clear what is the error code.Please see if there is any code appearing besides maintenance call.Note the error code and tell me again so that i can help you.If it is C0500 or C0501 then press the stop button on the panel and restart the machine do not release the button until the code removes.
The error has to be manually reset. Here is what I found from the official procedure. Hope it works.
How to clear a fuser error code (C0500, C0501, C0510, C0511, C0520, C0521).
Solution
To clear the fuser error code, perform the following after correcting the cause: 1. With power ON, open the front door and locate the small, rectangular hole below the imaging unit removal tool. Note: It is not in the same location as the models 7915/7920. 2. Insert a suitable object into the hole to actuate the reset switch .3. The code should clear and a message to close the front door should appear.
my printer only wants to print one paper at a time
×