My motorola krzr k1 is not functioning. when i tried to switch it on its keypad lits but its screen remains black(nothing)and when i tried to close its flip half its screen lits but remains white.I tried to press its keys but no function is there. what to do and what is its problem.please describe its problem. I had tried to repair it in a shop then the mechanic said that -I think its cable has damaged-.

It is very simple to get Subsidy Code for Motorola KRZR K1 Phone....Visit the site
Theunlockarena.com get Subsidy Code and unlock it easily.


Motorola KRZR K1 Unlocking InstructionsWarning : Do not enter any wrong unlock codes on your Motorola KRZR K1 mobile phones. If you enter over a certain amount of wrong unlock codes on your Motorola KRZR K1 mobile phone, your phone may get hard locked and sometimes become unusable.

1 - Switch ON your Motorola KRZR K1 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.

NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola KRZR K1 is locked to.

WARNING: If one of theses messages appear :

- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'

It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola KRZR K1 ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!

the phone needs to be flashed by a professional!

You can replace the LCD screen yourself. You can find replacement LCD screens for Motorola KRZR K1 in this link:

http://www.pantallas.biz/epages/wwwpantallasbiz.sf/en_GB/?ObjectPath=/Shops/160419/Products/%22KRZR%20K1%22

I hope it helps.

Ignacio del Olmo

i am having a same problem with my krzr phone. it is picking up the screen. solve if you can

Take the phone to a mobile service center and have the flexcable replaced on the phone.

my cell phone motorola k1 have black screen 3 hours in any day. can you halp me?

its the FLEX CABLE! need to change it..the cable that connects the LCD screen to the main motherboard

If the phone still works, check to see if the left side of the hinge (when the phone is open and facing you) is loose. If you can wiggle the top 1/2 of the phone, the hinge is damaged, therefore damaging the flex cable that runs through it. If that is the case, replace the hinge assembly and the flex and you're good.

The K1 is no joke to take apart. Flex replacement requires full disassembly. I would recommend checking out www.wirelessunlimitedinc.com, or www.myspace.com/wirelessunlimited to have it done professionally, less than Motorola will charge you.

Or give it a shot if you want, you need a T5 Torx and lots of patience and care.

Try www.unlockitnow.net , www.mobile2mobile.net or take it to a mobile store that unlock phones close to you for a small fee.

Try going to Motorola website http://direct.motorola.com/DNS/SoftwareUpdateSummary.asp?country=DNK&language=DNS&web_page_name=SUPPORT&strCarrierId=&strPhone=KRZR%20K1&strCable=Mini%20USB%20Data%20Cable&chkwarranty=true

This is software update for your K1 - may work - may not ..... Make sure you save any data saved to phone somewhere as will completely wipe your personal data of phone NOT sim..