Parrot universal radio mute is broken

If you were installing a separate hands-free phone kit along with the Kenwood head unit, you'd connect the Kenwood mute wire to the muting output on the hands-free kit. This allows the other device to mute the audio from your radio while you're using the phone. If you don't have a hands-free kit, you wouldn't connect the Kenwood's mute wire to anything at all.

DONT KNOW

If the parrot kit sound comes from your car speakers and your radio is working then the problem may be a wire in one of the connectors that are plugged into the Parrot blue box, I have seen wires pushing out when the plug is inserted.

Visit a parrot dealer (listings are on their website) and have them order a new screen for you and replace it.

Problem :
Password for Bluetooth
Solution :
Most bluetooth headsets use a universal "0000" (four numerical zero's) for the passcode
please rate my solution

sometime, it my be in relation with the install.
Just a simple question, did you install it by yourself? if yes, did you connect the mute cable of the kit? cause if you disconnect it and try to make working the kit and see if the mute is working may be the explanation. signal treatment.

(except trouble of the kit), after a while plugging on a 12v dc only can be the explanation. Do you have the message "good bye" on the display when you switch off the ignition key? If not, that could also be due to the fuses inverted to the vehicle between the 12 dc and the 12 ignition. Then you just have to inverse fuses.

Normally you would hold down the red and green button, but you dont have this parrot button, try holding down any of the steering wheel buttons. If this dont work you may have to get the button plugged in too perform this, try contacting your installer.

e51 does not work with parrot ck3100

hi, try using the object push in your settings. this happened to me and i had to install a program from my work and then object push. worth a try.....

In the parrot kits I've seen, they insert a relay to switch the audio to the phone. This only works with 2 speakers generally. Your vehicle either has dedicated amp channels for each of the 3 speakers/door or the installer tapped into the wrong point. If it has individual amps for each speaker, they may need to force the amp to shut off to get it to mute the audio.