Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Hey! bought a whole new galaxy dx95t2 from usa this week, rogerbep does not work when the radio is cold, it comes after a long while after it's been hot, what's the problem? is there anything I can do yourself to achieve this? tips? so I do not have to send it in for service! from knut in norway

1 Answer

Rod Wallberg

Master 494 Answers
Posted on Feb 15, 2010

Rod Wallberg

Master

Joined: Jun 15, 2009

Answers

494

Questions

Helped

171922

Points

1170

From what you describe it could very well be a cold solder joint, this can be a tough find as you need to know where to look on the solder side of the board. It also could be with the wiring going to the switch. Try moving the switch when it is cold to see if it will come on..... here is my email so we can keep working on this and I can answer questions....

[email protected]

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0helpful

1answer

Ive got a galaxy 99 i put new coax 18ft and a new k40 antennae 10 meter type i cannot get the swr to come down.i have tried grounding everything but no change.i even bought a new meter

How low do you want it . anything below 2 is fine and even 2.5 isn't going to hurt. its when you get higher than that then you should worry . Relocate your antenna on your vehicle. When you bought the new antenna and coax did you buy a new mount also ? You may have to shorten the antenna or lenghten it also to get a good match .

Read full answer

Mar 04, 2018 • Galaxy Radio Communications

0helpful

1answer

Changed the mic pcb and installed a new meter, now no lights, no tx, no rx, very low static noise is all the radio does.

did you install it all correctly?
re-check your work and check for cold solder joints

Read full answer

May 16, 2016 • Galaxy Radios DX 959 SSB CB Radio

0helpful

1answer

Bought a galaxy 98vhp--200 watts--piece of JUNK!! If you have one that works--send it to me???? I have three radios that put out under 100 watts that out perform the $500.00 new one from you--"GET YOUR...

this radio is a ham radio.It should put out 200 w on the ham freqs but it is only supposed to put out no more than 4 - 5 watts on am. Can do 50 on SSB and if you bought it without realizing it,and now you\'re mad because it won\'t do what it is supposed to. next time read the small print and you won\'t be out so much money.

Read full answer

Sep 26, 2013 • Radio Communications

0helpful

1answer

I have a 44 v everything works but no modulation

cold solder joints are a good place to start.

Read full answer

Jan 03, 2013 • Galaxy Radios DX-44V 40-Channels Base CB...

1helpful

1answer

I have recently bought a new Cobra 29 LTD BT(new) from the USA not realising it was 27MHz? Does anyone know if you can get them changed to 26MHz? Or does anyone do it? I'm a truckie & would li

It is stuck on 27 by design and FCC rules--those almost never will go down to 26 and if did would require extensive retuning to receive and or transmit there----sell it if you need 26 and buy a Ranger or Galaxy instead.

Read full answer

May 16, 2012 • Cobra 29-LTD BT Mobile CB Radio w/...

0helpful

1answer

Bought 2517 galaxy new,recieve gets low,freq.goes to 23.3333, tap on radio and everything goes back to normal, called galaxy, i had to send to PA, at my cost. tech said couldnt find anything wrong but cold...

call galaxy again they will send you to a different tech.or you could just say heck with them and take it to the tech of your choice. Sounds like he never finished the job and there are more then one cold solder spots.

Read full answer

Dec 25, 2011 • Radio Communications

2helpful

2answers

Galaxy Pluto frequency drifting

Find the crystals in the radio...hope you know what they look like...when you locate them touch one at a time to see if it will stop if it does you have a bad soilder joint on one of the legs or it could be that its time for a new crystal..they don't like the cold weather at all...but it is fixable so don't worry

Read full answer

Nov 27, 2009 • Radio Communications

1helpful

3answers

Just had a new Dometic 2652 refrigerator installed today. Pulled in home and now the whole trailer blows the circuit breakers in the house. We ran in a week (a/c,micro, radio) before we had the new...

hi
may be ur wires are short circuited so call ur dealer

Read full answer

Jun 25, 2009 • Dometic RM2652 Refrigerator

0helpful

1answer

Galaxy 959 distant stations sound like they are on sideband

jsmith? as in jaden smith or some other looser named j smith?

Read full answer

Jun 20, 2009 • Galaxy Radios DX-959 40-Channels Base CB...

0helpful

2answers

I have a galaxy (pluto) radio that does not go to set freqs till the radio is turned on for about 20 minutes.. then the radio works fine... maybe you can help me... thanks Dave .Melbourne Ont.

radio has a cold solder joint , take an eraser end of a pencil and lightly probe around the board to look for it this is the first thing to try

Read full answer

Feb 21, 2009 • Galaxy Radios DX-93T Base CB Radio

Not finding what you are looking for?

View Most Popular

DX-95T Base CB Radio

Radio Communications

Ive got a galaxy 99 i put new coax 18ft and a new k40 antennae 10 meter type i cannot get the swr to come down.i have tried grounding everything but no change.i even bought a new meter

Galaxy Radio Communications

230 views

Ask a Question

Usually answered in minutes!

Are you a Galaxy Radios Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Have a manual for Galaxy Radios DX-95T Base CB Radio? Or just drag it here!

Related Topics:

Trustworthy Expert Solutions

Hey! bought a whole new galaxy dx95t2 from usa this week, rogerbep does not work when the radio is cold, it comes after a long while after it's been hot, what's the problem? is there anything I can do yourself to achieve this? tips? so I do not have to send it in for service! from knut in norway

1 Answer

Rod Wallberg

Add Your Answer

Attachments: Added items

Related Questions:

Ive got a galaxy 99 i put new coax 18ft and a new k40 antennae 10 meter type i cannot get the swr to come down.i have tried grounding everything but no change.i even bought a new meter

Changed the mic pcb and installed a new meter, now no lights, no tx, no rx, very low static noise is all the radio does.

Bought a galaxy 98vhp--200 watts--piece of JUNK!! If you have one that works--send it to me???? I have three radios that put out under 100 watts that out perform the $500.00 new one from you--"GET YOUR...

I have a 44 v everything works but no modulation

I have recently bought a new Cobra 29 LTD BT(new) from the USA not realising it was 27MHz? Does anyone know if you can get them changed to 26MHz? Or does anyone do it? I'm a truckie & would li

Bought 2517 galaxy new,recieve gets low,freq.goes to 23.3333, tap on radio and everything goes back to normal, called galaxy, i had to send to PA, at my cost. tech said couldnt find anything wrong but cold...

Galaxy Pluto frequency drifting

Just had a new Dometic 2652 refrigerator installed today. Pulled in home and now the whole trailer blows the circuit breakers in the house. We ran in a week (a/c,micro, radio) before we had the new...

Galaxy 959 distant stations sound like they are on sideband

I have a galaxy (pluto) radio that does not go to set freqs till the radio is turned on for about 20 minutes.. then the radio works fine... maybe you can help me... thanks Dave .Melbourne Ont.

Not finding what you are looking for?

DX-95T Base CB Radio

Ive got a galaxy 99 i put new coax 18ft and a new k40 antennae 10 meter type i cannot get the swr to come down.i have tried grounding everything but no change.i even bought a new meter

Ask a Question

Top Galaxy Radios Radio Communications Experts

eradiostore

Grubhead

Brad Brown

Are you a Galaxy Radios Radio Communication Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

Hey! bought a whole new galaxy dx95t2 from usa this week, rogerbep does not work when the radio is cold, it comes after a long while after it's been hot, what's the problem? is there anything I can do yourself to achieve this? tips? so I do not have to send it in for service! from knut in norway

1 Answer

Rod Wallberg

Add Your Answer

Attachments: Added items

Related Questions:

Ive got a galaxy 99 i put new coax 18ft and a new k40 antennae 10 meter type i cannot get the swr to come down.i have tried grounding everything but no change.i even bought a new meter

Changed the mic pcb and installed a new meter, now no lights, no tx, no rx, very low static noise is all the radio does.

Bought a galaxy 98vhp--200 watts--piece of JUNK!! If you have one that works--send it to me???? I have three radios that put out under 100 watts that out perform the $500.00 new one from you--"GET YOUR...

I have a 44 v everything works but no modulation

I have recently bought a new Cobra 29 LTD BT(new) from the USA not realising it was 27MHz? Does anyone know if you can get them changed to 26MHz? Or does anyone do it? I'm a truckie & would li

Bought 2517 galaxy new,recieve gets low,freq.goes to 23.3333, tap on radio and everything goes back to normal, called galaxy, i had to send to PA, at my cost. tech said couldnt find anything wrong but cold...

Galaxy Pluto frequency drifting

Just had a new Dometic 2652 refrigerator installed today. Pulled in home and now the whole trailer blows the circuit breakers in the house. We ran in a week (a/c,micro, radio) before we had the new...

Galaxy 959 distant stations sound like they are on sideband

I have a galaxy (pluto) radio that does not go to set freqs till the radio is turned on for about 20 minutes.. then the radio works fine... maybe you can help me... thanks Dave .Melbourne Ont.

Not finding what you are looking for?

DX-95T Base CB Radio

Ive got a galaxy 99 i put new coax 18ft and a new k40 antennae 10 meter type i cannot get the swr to come down.i have tried grounding everything but no change.i even bought a new meter

Related Topics

Ask a Question

Popular Questions

How to adjust frequency on transmit??? Galaxy

How to peak and tune a galaxy 959 for beginners.

I have a Galaxy DX44V

Kl 203 rm italy linear amp transmitt

I have a Galaxy DX 33 HP CB radio, but i have

Top Galaxy Radios Radio Communications Experts

eradiostore

Grubhead

Brad Brown

Are you a Galaxy Radios Radio Communication Expert? Answer questions, earn points and help others

Manuals & User Guides