I need to type a paper for class. how do i start? i have a laptop.

it is tool , not a computer .
but here is googles 1st hit

https://www.nodevice.com/service-manuals/other/duplo/dbm-100#lang-en



It is
Duplo DBM-100 Booklet Bookletmaker and Trimmer

Type: Automatic paper size setting type saddle-stapling and folding unit
Paper size:
Saddle-stapling and folding/Center-folding

a commercial type class machine.
and needs service
so buy the service manual?

Hi,

Check if you have any cd burnig software installed. If there is none, the you can download free on the internet. Or if you already have one, and still you cannot burn, then do the steps below.

Here's How:

1. Click on the Start button.
   If you're using Windows XP, also click on Run.
   
2. In the search box (Windows 7 and Windows Vista) or the Run textbox (Windows XP) type regedit and click OK or press the ENTER key.
   This will open the Registry Editor program.
   Important: Changes to the registry are made in these steps. Take care in making only the changes outlined below. While it's not a necessary step to complete this process, I recommend that you play it safe by backing up the registry keys you're modifying.
   
3. Locate the HKEY_LOCAL_MACHINE folder under Computer/My Computer and click the '> or (+) icon next to the folder name to expand the folder.
   
4. Continue to expand folders until you reach the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class registry key.
   
5. Click on the '> or (+) icon next to the Class key to expand it. You should see a long list of subkeys open up under Class that look something like this: {4D36E965-E325-11CE-BFC1-08002BE10318}.
   Note: Each 32-digit subkey is unique and corresponds to a particular type, or class, of hardware in Device Manager.
   
6. Determine the Correct Class GUID for the Hardware Device. Using this list, find the correct Class GUID corresponding to the type of hardware that you're seeing the Device Manager error code for.
   

Hope this helps

Regards,
Meir

You need to reset the hi and lo filters for the device, as this is caused by a registry error or corruption
Close all open programs

Click on Start

Click Run

Type REGEDIT and press Enter

Vista doesn't come with the run command enabled so just type REGEDIT in the search bar above Start..

Click on the plus signs (+) next to the following folders to open them.

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}
(looks like same file name for XP and Vista?)

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters
Lower Filters
Upper Filters.bak
Lower Filters.bak

Your rollers will need to be replaces. Rollers feed the paper through the tray. You can find paper feed rollers for your device here:

http://www.precisionroller.com/paper-feed-components-for-canon-laser-class-2050p/products.html

They are very straight forward to install and instructions should be in your manual.

HI
If it is regarding the CD/DVD dvrive then follow this:

Please go ahead and click on start > in start search type in device manager {(in vista ) in case of xp right click on my computer > properties > hardware > devicemanager}.
In device manager click on the + sign beside the cd- dvd > then right click on the driver and uninstall it .
Then in start search type in regedit {(for vista ) for xp in run type in regedit}
Look for some thing like
HKEY_LOCAL_MACHINE
Then SYSTEM
Then CURRENT CONTROL SET
Then CONTROL
Then CLASS
Then find {4D36E965-E325-11CE-BFC1-08002BE10318}
The whole thing looks like this:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
Then on the right hand side look for something like upper and lower filters and delete the upper and lower filters....
Restart the notebook . It will help

Ok dont exced the normal paper typeing Like thickness( you need to read your brochure
and check for acceptable thickness and paper class
The bottom is normally a reserve tray for paper

Hi ...

If you wish to print using a paper size which is different from the normal one A4, you need to specify the same to the printer else it will not recognize or will not accept the paper ...

Below are the steps that you can follow to:
1) Specify paper size
2) Specify paper type ..

Specifying the Paper Size At the factory, the paper size has already been set to [LTR]. Normally, you can make copies in this setting. When making copies on other sizes of paper, you need to specify the paper size according to the following.

1. Press <Menu>.
   
   
   
2. Press <> or <> to select [COMMON SETTINGS], then press <Set>.
   
3. Press <> or <> to select [PAPER SETTINGS], then press <Set>.
   
   
   
4. Press <> or <> to select [PAPER SIZE], then press <Set>.
   
   
   
5. Press <> or <> to select the appropriate paper size (LTR, LGL, EXECUTIV, A4, B5, ENVELOPE, or FREE SIZE), then press <Set>.
   
   
   When [ENVELOPE] is selected: Press <> or <> to select the type of envelopes (COM10, MONARCH, DL, or ISO-C5), then press <Set>.
   When [FREE SIZE] is selected: Press <> or <> to select [VERTICAL SIZE] or [HORIZONTAL SIZE], then press <Set>. Use the numeric keys, or press <> or <> to specify vertical and horizontal sizes of the paper in millimeters (mm).
   Available range in [VERTICAL SIZE]: 127 mm to 356 mm (5" to 14")
   Available range in [HORIZONTAL SIZE]: 76 mm to 216 mm (3" to 8 1/2") Press <Set>. Repeat the steps above to specify both vertical and horizontal sizes of the paper.
   
   
6. Press <Stop/Reset> to return to the standby display.

Specifying the Paper Type [PLAIN PAPER] is selected as the default paper type. When making copies on paper other than plain paper, you can specify the paper type according to the following. Specifying the paper type can prevent poor copy quality, or the printout not being printed correctly.

1. Press <Menu>.
   
   
   
2. Press <> or <> to select [COMMON SETTINGS], then press <Set>.
   
   
   
3. Press <> or <> to select [PAPER SETTINGS], then press <Set>.
   
   
   
4. Press <> or <> to select [PAPER TYPE], then press <Set>.
   
   
   
5. Press <> or <> to select the appropriate paper type, then press <Set>.
   
   
   You can select from the following paper types: - Plain paper (17 lb to 24 lb (64 g/m2 to 90 g/m2 )): [PLAIN PAPER] - Heavy paper (25 lb to 34 lb (91 g/m2 to 128 g/m2 )): [HEAVY PAPER], [HEAVY PAPER H]*1 - Transparency: [TRANSPARENCY] - Label*2 : [HEAVY PAPER], [HEAVY PAPER H]*1 - Envelope: [HEAVY PAPER], [HEAVY PAPER H]*1*1 If print fixing is not sufficient when printed with [HEAVY PAPER] selected, select [HEAVY PAPER H].
   *2 A label that can be loaded in the cassette is a standard type (label standard card) only.
   
   
   
6. Press <Stop/Reset> to return to the standby display.

Please vote if this helps ... Cheers :)

If the burner does not show up in device manager or has an error in device manager, do the following

Start Registry Editor (Start, Run and type in regedit then click O.K)
Locate the UpperFilters value under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
On the Edit menu, click Delete, and then click OK.
Locate the LowerFilters value under the same key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}
On the Edit menu, click Delete, and then click OK.
Quit Registry Editor.

Hope this helps

Get out of BIOS before you kill somebody..haha just joking...
click on start>control panel>network connections>right click on your computer icon that says wireless and click disconnect. Then do the same thing when you want to start it back up just click on connect.. Let me know how it goes.

Don't forget to rate this with 4 stars before you log off.