My Panasonic SA-HT75 clicks off seconds after I turn it on. Even got a F61 code. Any suggestions?

F61 is a secondary power supply issue causing the mechanics to jam up or the CD mechanism has jammed causing this message.

The audio ic is faulty in your home theater.You gonna have to take it in for repairs.

There Panasonic SA-ht75 dvd Decreasing the opening treading on what's happening back immediately shuts down

Open the unit and clean/replace the fan.
If it doesn't turn when you power it on after cleaning it, put some oil on its bearing sleeve.
Never power on this device while speakers are not connected!

Hope this solves your problem!

1. AFTER A FEW SECONDS MY SISTEM SHUT DOWN AND SHOW ME F61 ON THE SCREEN

The laser has failed. They all go this way. Throw it away and don't buy Panasonic next time.

the f61 code is an audio code for panasonic first make sure all connections are correct and tight for spearkes...at the base if unit has base and with connections in back of unit and are fully in to connection terminal...make sure speakers are on and not on mute ...sometimes though you may have to re strip the wires to get into connection termianl in the back of the unit if that does not work call panasonic 1-800-211-PANA(7262) for more technical support

I Have a panasonic mdvd home theater modl#SA-HT920, WHEN I RAISE THE VOLUME IT SHUTS DOWN AND INDICATES F61 ON THE LCD SCREEN HOW CAN I SOLVE THE PROBLEM

Hi,

F61 error codes could either be IC501 or the regulator (IC502) in the power supply section.

For reference, pls view these two (2) posts here and here of similar concern on other models.

Other possibilities are:
1. fan not turning;
2. cold solder;
3. looses connections;
4. one of the other components/systems hooked up to the power supply is causing a fault (tuner, disc player).

Hope this be of additional help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

speaker cord connector problem:-
remove all speaker connectors and insert it one by one each time until you find the bad one and change its connector with a new one.
(you must play something and listen).if all above does not work you will have problem in power supply and need to fix.