Front loader AWM 6100 - door open light flashes and won't wash

Might be the door lock

Sounds like the front door switch has come out of place, or the actuator is out of place. If you can take the front cover off to get to this switch, you should be able to get it back into place pretty easily. Hope this helps, chad

There should be a door-actuated limit switch which detects that the door is closed, which is probably defective. Look for the plunger, listen for the click. It is the most likely component to fail, and is inexpensive to replace if you're handy. Be sure to have your machine unplugged during repairs.

If your machine is a Duet model or it's relative, first unplug the machine then remove the lower valance under the door (three screws on the botttom of the machine) reach up by the door lock and you'll find a plastic tab hanging down, that's the manual release for the door lock. Wile you have the valance off look inside the machine and pull out the technician sheets that are stuck on the inside wall of the machine, you may need them later.

Has anyone had any joy with this? I have exactly the same problem.

Thanks

check brushes on motor. how old is machine?

FH means there is No Water or that's what it thinks.
You either have a water problem or a faulty water valve.
Hope this helps

Mine was made in 2000 if that any help

my whirlpool 6th sense will not start all lights and power i think that it is the door sensor at fault? The green light door locked light is not on.

Go to www.Searspartsdirect.com You should be able to find an exploded view and parts list