Can I use drivers for dwa-11o in dwa-111?

Downlaod the latest drive from there website. The discs sometimes come with back drivers on them. http://support.dlink.com/ProductInfo.aspx?m=DWA-131

here is a link to the D-Link website where you can download the relevant drivers etc.
http://www.dlink.com/products/default.aspx?pid=DWA-140&tab=3

here's a link to download your drivers.
http://www.dlink.com/products/?tab=3&pid=DWA-125&rev=DWA-125
just click on drivers on the right side menu.. and choose the one for your Operating System. download and install it. You should be able to use your usb adapter once the driver is installed.

Download D-Link DWA-120 Windows Drivers and Utility @ http://www.wireless-driver.com/download/d-link/dwa-120-wireless-windows-driver-utility.htm

Hope it helps.

i found a solution in another web site see if helps
http://torley.com/how-i-got-my-wireless-g-usb-adapter-working-with-a-mac

Hi, what are you trying to install pls? Mark

OK... Just download the driver/software revision matching your USB adapter (have a look on it's sticker. If no revision is noted, then it's simply DWA-130!):

DWA-130:
ftp://ftp.dlink.com/Wireless/dwa130/Drivers/dwa130_drivers_130.zip

DWA-130_revB:
ftp://ftp.dlink.com/Wireless/dwa130_revB/Drivers/dwa130_revB_drivers_200.zip

DWA-130_revD:
ftp://ftp.dlink.com/Wireless/dwa130_revD/Drivers/dwa130_revD_drivers_100.zip

DWA-130_revE:
ftp://ftp.dlink.com/Wireless/dwa130_revE/Drivers/dwa130_revE_drivers_510.zip

I assumed you're using a Windows OS...

After uninstalling it completely from the computer. When you plug in the adapter alone. You must get the "Found New Hardware" wizard. And nothing else apart from this. Only then it is correct. If nothing comes up at all, the device is dead or your version of USB might USB 1.0 or USB 1.1 which at times has issues. But if you see that wizard coming up, unplug the adapter and insert CD and run setup and walk through it.

Anyway, i ll recommend that you try this adapter on other NEW computer(laptop or desktop), just to check.
I feel that this adapter would work on a new computer, maybe your computer's hardware specifications are old to support this device.

hi,can any help me with the problem i have problem not play audio

What specific error message/s does your computer prompt when you trying to install the wireless USB adapter? Since your running Windows XP you can skip on "run the CD first", try uninstalling all the componets for the adapter then restart the computer, when the computer is booted up properly insert the USB adapter(preferably used the USB port on the back of your desktop for maximum power). When the found new hardware wizard pops up, choose install software automatically(make sure that the setup CD for the USB adapter is already loaded on the CD-ROM drive then hit next.
If the installation proceeds click on finish a bubble should appear on the lower right hand side of your dekstop screen(syatem tray) prompting you that one or more wireless network is being detected, click the baloon and check if your network will show up on the list.