Clarity C4210 Amplified Digital Crodless Caller ID Phone Logo
Posted on Feb 22, 2008

Voice mail flashing blue light

Flash for voice mail doesn't work

1 Answer

A

Anonymous

Forgrt it! Our problem is the flashing blue light works and keeps us awake making it necessary to hide the phones in drawers! We can't turn off the flashing blue lights and can't find an answer to this problem.

5 Related Answers

ctess1

  • 3 Answers
  • Posted on Jun 05, 2008

SOURCE: New Voice Mail flashing light

What worked for me was to call my phone from another phone and leave myself a voicemail. I then called into my voicemail, listened to and deleted the message. This reset my handsets so the New Voicemail indicator is no longer flashing.

Hope that helps!

Ad

ctess1

  • 3 Answers
  • Posted on Jun 05, 2008

SOURCE: New Voice Mail flashing light

What worked for me was to call my phone from another phone and leave myself a voicemail. I then went in and retrieved and deleted that voicemail. Once I hung up from my voicemail service my handsets reset about 10 seconds later.

I hope this helps!

A

Anonymous

  • Posted on Aug 25, 2008

SOURCE: voice mail indicator light is always on

I have 6 of these phones. No problem for a year or so, then one phone got the message light stuck on. Tried some online suggestions without success. Powering down etc. failed to fix it so I stuck a piece of tape over the led.

A couple of weeks ago line 2 failed (externally) and ATT sent a tech out who repaired it and also cleaned up the line. When the line came back, all 6 phones had the message light stuck on!

Talked with the tech here and with the ATT support and nothing worked. Eventually the tech here left as it was not a line fault - but he said he would leave the problem open.

That evening a young ATT guy called. He tried a number of different settings and changes - he was really determined! He called Kentucky and Minnesota and part of the advice was "give up and don't call the customer back"!

Finally he found a configuration option in the central office switch (exchange) for the line called CWMI (Call Waiting Message Indicator). Apparently this option was originally active but was changed when the local trunk was upgraded to fibre over the last year or so.

Once he enabled this option (we have call waiting and caller ID on call waiting on this line), the message lights on all the phones turned off and have worked normally since (10 days), including the one that was "broken" for over a year!

I really credit the tech with persistance on the issue.

Hope this helps someone else out there.

Regards, Hugh

Anonymous

  • 1 Answer
  • Posted on Nov 02, 2008

SOURCE: voice mail light

You have to press the delete and up button at the same time.

Anonymous

  • 2 Answers
  • Posted on Jul 14, 2009

SOURCE: voice mail - red light does not work

Contact your phone company to make sure the stutter tone and/or feature for Voice mail notification is on. I too had the same problem many years ago with AT&T (Then SBC) to correct this.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2helpful
1answer

Kx-t7433 how to turn on fwd/dnd does not work

What happens when you dial 165 on the intercom? If you get voice mail, then try dialing 7104 165 # on the intercom. That sets CF-No Ans to voice mail for your set and the FWD/DND button should light solid (or not, it's a program option) or flash. If you dial 7101 it should turn on Do Not Disturb (7100 cancels). In DND, the FWD light should flash.

Once you have set these two conditions up, the FWD/DND button has 3 states, FWD, DND, and OFF.

Carl
0helpful
1answer

I receive a call from outside, press flash and dial the extension but it the person to whom I direct the call can not get the call and if I try to return to the call, it is disconnected.

The FLASH button is for outside calls. Try the TRANSFER button. If the inside party doesn't answer, press the outside line button that's flashing green. If you have a Panasonic brand voice mail, you can also transfer the call to voice mail with another button.

Carl
0helpful
1answer

How do i stop the blinking blue light on my ge 6.0 phone?

hi... first of all clear all voice mails from the provider (Comcast digital voice service allows you to do it via web),  and ur dial tone will returne to normal sound and ur light indicator will stop flashing....

thank u rate me
1helpful
3answers

CD445

i still have flashing red light and the message now reads phillips
new message

how do i get this message
what number do i use to set up voice mail since i do not subscribe to voice mail? When i activate voice mail i get the operator

i still have faith that we can solve this problem

peace

robert barnes
0helpful
1answer

Panasonic tvs-100 voice mail beeping and flashes red power light four times

I'm having an issue with the same unit. But the blinking light is NOT on my phone it's the power light to the actual unit in my server room. It will flash 4 times and then stop. Flash 4 times again... I have looked through the manual to see what 4x power light means and I have found nothing!
32helpful
5answers

New Voice Mail flashing light

press "mute" key to access menu, press the up or down arrow key labeled "caller ID- volume" until you get to "handset setup", press the "mute" key again, press the down or up arrow until you have "defaultsetting" selected, press "mute" key, press "1", then press "mute" once more. At this point your handset will reset clearing the indicator for all the handsets. I've had to do this twice on my phones and it worked every time.
0helpful
3answers

New voice mail

put a piece of electrical tape over the light. I cant turn my blue light off either.
3helpful
2answers

New Voice Mail flashing light

What worked for me was to call my phone from another phone and leave myself a voicemail. I then went in and retrieved and deleted that voicemail. Once I hung up from my voicemail service my handsets reset about 10 seconds later.

I hope this helps!
35helpful
7answers

Displays new voice mail and VMWI constantly blinking when no voice mail

Subscriber is T-Mobile@Home. First, cleared all messages from T-Mobile voicemail.

Now to fix your GE phone:


Push the program key. Select Handset Setup Push the program key Select Default Settings Push the program key Select 1 Yes. Push the program key
Hope this helps.
3helpful
1answer

Voice mail light

You have to press the delete and up button at the same time.
Not finding what you are looking for?

482 views

Ask a Question

Usually answered in minutes!

Top Clarity Lands Phones Experts

Ngoro

Level 3 Expert

3521 Answers

Cindy Wells

Level 3 Expert

6688 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66847 Answers

Are you a Clarity Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...