Question about Life Fitness 9500HR Next Generation Remanufactured Treadmill

1 Answer

Hi! i have a life fitness 9500HR treadmill and it says incline error on the screen! and the incline doesn't work?? can i fix it somehow?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Unplug the treadmill . Remove front cover. On the right hand side if you are facing the front - in the siderail is a white switch that tells the treadmill it is all the way down. Check that it is in place and clean.
If you plug the treadmill in.{Do not touch any thing in the motor compartment} When you press start it should go all the way down [home] to contact the switch. You can also see the lit motor turn at this time before the belt will move it must be all the way down.

Posted on Feb 09, 2010

  • 1 more comment 
  • Ronnie Pelton
    Ronnie Pelton Feb 09, 2010

    If the lift motor does not turn it may be your problem

  • Mpango Collins
    Mpango Collins Dec 10, 2018

    Hi My 9500HR cuts speed while in use

  • Mpango Collins
    Mpango Collins Dec 10, 2018

    Hi My 9500HR cuts speed while in use

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Life fitness 9500hr treadmill belt not moving and speed sensor error comes up on the screen


see the video and lube to the rollers bearing front+back .
and Run the calibration software for easy diagnostic for s. sensor
God bless you

Oct 17, 2013 | Life Fitness 9500hr Next Generation next...

1 Answer

We have Lifefitness 9500HR Treadmill. I am getting a Bad Controller Error. We have two 9500HR models. I swapped out Controller, with working 9500HR and still get Error. Keeps going into Notify Maintenance....


I would suggest swapping the consoles to see if the problem follows. If this does not help you figure it out, you are more than likely looking at a wiring issue.

Sep 23, 2013 | Life Fitness Exercise & Fitness

1 Answer

9500hr treadmill said "notify maintenance


Your treadmill is notifying you that some maintenance operation has to be performed.

Nov 21, 2017 | Life Fitness 9500HR Treadmill Next...

1 Answer

Sir, i have a life fitness 9500hr. I hit start screen reads incline inoperable. Everything else works but won't incline. Thanks


please check the fuse of 0.3 amp is located in the front of the machine revises this swicth home underneath the left side of the machine or check for side always in the left if the cables are not disconnected last step and check the capacitor is located on the hoist motor any question send me a message cardiotech_me@hotmail.com

Aug 15, 2010 | Life Fitness 9500HR Next Generation...

1 Answer

Unit will not start. it does work in maintenance mode. All fuctions work in the maintenance mold. When using the quick start or other setting to start workout, the unit does not start. " Please Wait " is...


Get back into System test hit enter it will automatically to a check once completed. Then go to Lift motor module Go to manual incline and go to maximum incline then to 0 incline then get out of system test unplug unit for about 30 seconds. Then plug unit in if this does not work the limit or home switch may be the culprit

Jun 29, 2010 | Life Fitness 9500HR Next Generation...

1 Answer

Hi have life fitness 9500hr.when i opne MOTER


Every time I have gotten this message, I have had to replace the motor controller.

Feb 27, 2010 | Life Fitness 9500HR Next Generation...

1 Answer

Manual for lifefitness 9500hr treadmill old modle


Just call Life Fitness and they will send you one via e-mail attachment.

(800) 351-3737 between 8 a.m. and 5 p.m., CT Monday through Friday.

stephen
----------

Aug 01, 2009 | Life Fitness 9500HR Next Generation...

Not finding what you are looking for?
Life Fitness 9500HR Next Generation Remanufactured Treadmill Logo

649 people viewed this question

Ask a Question

Usually answered in minutes!

Top Life Fitness Exercise & Fitness Experts

Vincent_G
Vincent_G

Level 3 Expert

2360 Answers

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Android Man
Android Man

Level 2 Expert

278 Answers

Are you a Life Fitness Exercise and Fitnes Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...