I DISCONECTED ALL MY CABLE SO NOW I CAN'T ABLE TO CONNECT THE WIRE BECAUSE I LOT MY BOARD CHART

It is easy...

remember this your motherboard is like a children play house red for red, square for square.. if it is not compatible for the socket it will never be placed well..

you need to connect the following..

first your main power supply to your motherboard

it is very easy to see.. it is a group of maybe 16 wires in a plastic connector..you will connect it to your motherboard..

your processor power is a four wired in plastic connector but it is square in shape..

note: take a good look in each connector they have squares cirlce, etc shapes in each wires so don't force it to connect if it is hard to it means it is not for that socket..

this is the turning point..

your power button, reset button, pw LED, HDD LED,

maybe you know where it is placed,
but note the sequence.. pw button, reset, pw led,hdd led,

if not you can try to short the pins of *********** board so that you will know where the power button will be placed...

your usb and internal speaker has their own pins....

note: take a good look to your motherboard before you connect it, it may cause you some trouble..

take a look at the + ,- signs that is encrypted in the motherboard...

you have to the red wire is fore the posite and the black is negative..

i know it is compose of four wires but they are in one socket right...

your hdd connect it i know you know that how..

that's all..