ViewSonic VG2230WM LCD Monitor Logo
Anonymous Posted on Feb 06, 2010

Blank Screen Viewsonic VG2230wm 22" monitor. For the last few weeks I have been noticing that when I turn the monitor on it would bllink and go out. When I turned the montitor off and on again it would work fine. Then while in the middle of working on my computer the screen went black. I noticed that the blue light was still on, I turned the monitor off and back on but the screen remains blank. I shut down the computer and the monitor and let them set for a few minutes then turned them back on. The monitor light turned blue indicating it was on but the monitor did a quick light screen that turned black. Could it possibly be the connection in the back of the monitor? I operate my system using the DVI cable input. If that would not be the issue, I could use some ideas as to what I should check next. Thanks!

  • Anonymous Feb 06, 2010

    Could you tell me the easiest way to get the back off the monitor without breaking it? I have removed all the screws and I noticed a small slot with a padlock symbol on it. I have check to see if there is a lever I need to press but have found nothing. Seems like there is a trick to separate the cover, can you please let me know the trick. Thank you!

×

1 Answer

Bud Martin

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Master 11,361 Answers
  • Posted on Feb 06, 2010
Bud Martin
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Oct 24, 2009
Answers
11361
Questions
1
Helped
3366076
Points
33650

Common problem in monitors are bad caps in the power supply, that is the first place to check, look for bad caps with bulging top/bottom, see example of failed VIEWSONIC monitors due to bad caps here (worst case will be bad lamps): http://s807.photobucket.com/home/budm/allalbums
Post back what you see so we can help you further.

  • Bud Martin
    Bud Martin Feb 07, 2010

    You will need flat blade screw driver or a strong tweezer (I use tweezer most of the time, see my tool album at photobucket.com). You will start at the bottom section of the monitor first, then work it all the way around, it is hard to explain. By the way, the locking key symbol is for theft security hook.

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to perform viewsonic VG2230wm red line removal?

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.
0helpful
1answer

Removing back panel of a viewsonic monitor

There are almost always plastic clips along with the screws. I'd recommend buying a plastic pry bar. You can google for them online and they cost $1 or so.
0helpful
1answer

Viewsonic vg2230wm - the screen is blank when the computer first boots. I have to turn the monitor power switch on/off several times before the screen turns on, then it is fine.

Check your VGA (Visual Graphic Adapter) connector from your C.P.U (Central Processing Unit) to your monitor if it is intact. If it is intact , replace the VGA cable first. Then if the problem still persist check for the VGA driver in the device manager if it is correctly installed. If the problem persist try and send mail to me on [email protected]
Cheers.

Engr. Adewumi I.O
0helpful
1answer

The screen keeps going blank

Check for bad caps with bulging tops as shown in my pictures here: http://s807.photobucket.com/albums/yy352/budm/Viewsonic%20VG2230WM/
You should replace them in a set.

Basic LCD monitor and LCD TV troubleshooting guide:

http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV, Monitors, Caps : http://s807.photobucket.com/home/budm/allalbums

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Capacitor kits: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Please post back what you find.

1helpful
1answer

Viewsonic VG2230wm 22 Blank screen

Look for bad caps in the power supply first, see example of failed VIEWSONIC monitors due to bad caps here: http://s807.photobucket.com/home/budm/allalbums
Post back what you see so we can guide you furhter.
0helpful
1answer

My Viewsonic VG2230wm refuses to use its native resolution of 1680 x 1050. Whenever I select this resolution, it registers on the computer display settings, but when I check on the monitor display panel...

You will need to adjust your monitor settings in the NVidia control panel. You can get to this by right clicking somewhere in a blank spot on your desktop and then selecting it from the menu. You will want to go into the Display section. If you aren't able to see that section, change from "Standard" to "Advanced" settings at the top of the screen.
2helpful
1answer

Vg2230wm monitor Will not power on

probably your power supply. Is it a cord direct from plug in for is there a box between where you plug it in and then a small round end that goes into the monitor. This would be the good news. If it plugs in direct then that means the power sopply is in the monitor itself which means more expensive to fix
1helpful
1answer

Black screen, power button flicks

The monitor should come when the power button is pressed once - period. If not, and it continues to happen when connected to another PC, then the hardware is having trouble powering up the panel / ccds and it should be replaced/serviced according to the terms of the warranty. I suggest to bring it to an authorized service center for proper diagnosis & fix the problem. regards
0helpful
1answer

Screen goes blank

abandoned problem for now. will look for inverter board or parts from another monitor
Not finding what you are looking for?

1,208 views

Ask a Question

Usually answered in minutes!

Top ViewSonic Computers & Internet Experts

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Rob Hill
Rob Hill

Level 3 Expert

1480 Answers

Are you a ViewSonic Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...